CALLING YOUR SYSTEM OPERATOR
•
Lift the handset and dial
0
to call your system operator or group of opera-
tors.
•
If you want to call a specific operator, dial that person’s extension number.
7
6
INTERCOM CALLS
CALLING OTHER STATIONS
•
Lift the handset.
•
Dial the extension number or group number.
•
Wait for the party to answer.
•
If you hear several brief tone bursts instead of ringback tone, the
station you called is set for Voice Announce or Auto Answer.
•
Begin speaking immediately after the tone.
•
Finish the call by replacing the handset.
ANSWERING INTERCOM CALLS
•
Lift the handset and you are automatically connected to the ringing call.
•
Finish the call by replacing the handset.
BUSY STATION CALLBACK
When you call another station and you receive a busy signal:
•
Hookflash, receive transfer tone, dial
44
, receive transfer tone and hang up.
•
When the busy station becomes free, your telephone will ring.
•
Lift the handset to automatically call the now idle station.
NOTE: You have 30 seconds to answer or the callback will be canceled.
BUSY STATION CAMP-ON
When you call another station and receive a busy signal but you do not want to
wait for a callback:
•
Hookflash, receive transfer tone and dial
45
.
•
The called station will receive off-hook ring or camp-on tone.
•
You will hear ringback tone.
•
Wait for the called party to answer.
The called station must release its first call or put it on hold before answering your
camp-on.
Home Page
Table of Contents
STD Telephone
