OfficeServ 7200 System Description
© SAMSUNG Electronics Co., Ltd.
2-3
2.2 Cabinet Configuration
The OfficeServ 7200 consists of two cabinets (basic/expansion cabinet) mounted on the
19-inch rack and a feature server that operates externally.
The MP20, which is the main control part and is installed into the basic cabinet, manages
the entire OfficeServ 7200, performs switching, processes signals, and manages the
subscriber terminals. The LCP, which is the minor control part and is installed into the
expansion cabinet, controls the line boards and sends/receives information to/from the
MP20.In addition, line boards, power, and cooling fans are in the OfficeServ 7200 cabinets.
Figure 2.1 Cabinet Configuration of the OfficeServ 7200 with MP20
The OfficeServ 7200 with MP20S is configured with only a basic cabinet mounted on a 19-
inch rack. The Main Control Processor (MP20S) is installed into the basic cabinet,
manages the basic cabinet of OfficeServ 7200 and performs switching, processes signals,
and manages the subscriber terminals.
Front Side of
Extension Cabinet
Front Side of
Basic Cabinet
LCP
SLOT 1
SLOT 2
SLOT 3
SLOT 4
SLOT 5
MP20
SLOT 1
SLOT 2
SLOT 3
SLOT 4
SLOT 5
Rear Side of
Extension Cabinet
Rear Side of
Basic Cabinet
⑤
⑦
