OfficeServ 7200 System Description
© SAMSUNG Electronics Co., Ltd.
2-41
Front View of the PLIM2
The front view of the PLIM2 is shown in the figure below.
Figure 2.28 Front View of the PLIM2
The components on the front panel of the PLIM2 have the functions below:
Table 2.31 Ports and LEDs of the PLIM2
Ports, LEDs
Functions
P1~16
Port that connects to the Ethernet
Left LED of P1~4,
P9~12
First LED: Indicates if the P1~4, P9~12
’s link is operating
- On: When the link is operating, LED is turned on into green color
- Blink: When each port is active, the LED is blinking
Second LED: Indicates whether the P1~4, P9~12 are operating in 10/100
BASE-T mode
- Off: In operation as 10 BASE-T
- On: In operation as 100 BASE-TX
Right LED of P1~4,
P9~12
First LED: Indicates if the P5~8, P13~16
’s link is operating
- On: When the link is operating, LED is turned on into green color
- Blink: When each port is active, the LED is blinking
Second LED: Indicates whether the P5~8, P13~16 are operating in 10/100
BASE-T mode
- Off: In operation as 10 BASE-T
- On: In operation as 100 BASE-TX
PLIM2
P1
P5
P2
P6
P3
P7
P4
P8
P9
P13
P10
P14
P11
P15
P12
P16
