CALLING YOUR SYSTEM OPERATOR
•
Dial
0
to call your system operator or group of operators.
•
If you want to call a specific operator, dial that person’s extension number.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the
SPEAKER
button before you begin dialing.
19
BUSY STATION CALLBACK
When you call another station and receive a busy signal:
•
Press the
CBK
button, if programmed, or dial
44
.
•
When the busy station becomes free, your keyset will ring.
•
Lift the handset to call the now idle station.
NOTES:
1.
A callback will be canceled if not answered within 30 seconds. If you have set
a callback, your
CBK
button will light.
2.
If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER
button before dialing.
BUSY STATION CAMP-ON
When you call another station and receive a busy signal but you do not want to
wait for a callback:
MANUAL CAMP-ON
•
Press the
CAMP
button or dial
45
.
•
The called station will receive off-hook ring tone repeated every few seconds
and its first available
CALL
button will flash green to indicate your call is wait-
ing.
•
Wait for the called party to answer.
•
The called station must release its first call or place it on hold before answer-
ing your camp-on.
NOTES:
1.
If you receive No More Calls tone, that station has no available button to
accept your call. Hang up or leave a message.
2.
If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER
button before dialing.
AUTO CAMP-ON
When you want to automatically camp on to a busy station without pressing the
camp on button every time you call a busy station, you can set your phone for
auto camp-on.
•
With the handset on-hook, press
TRANSFER
and then dial
110
.
•
Dial
081
to turn on auto camp-on or
080
to turn it off.
•
Press
TRANSFER
to store your selection.
18
Home Page
ITP-5107S
Table of Contents
