PRIVACY RELEASE
This feature will allow another station to join in our conversation by releasing pri-
vacy on the C.O. from your phone.
To Release Privacy:
While you are talking on a C.O. line and you wish to have other internal parties (or
up to three) join the conversation.
•
Press the
PRB
button (the
PRB
button will light steady red). Inform the other
party that he/she may now join the conversation.
After the other party (or parties) has joined the conversation and you wish to
return privacy to the line so that no one else can join the conversation, press the
PRB
button a second time, the
PRB
button will be off.
To Join a Non-Private Conversation:
When someone has informed you that you can join a conversation:
•
Press the
C.O. line
button that he/she has indicated.
OR
•
Dial the
C.O. line number
that he/she has indicated.
27
•
Dial
0
to cancel current condition
OR
Dial
1-5
to select the forward type
OR
Press
UP
or
DOWN
to select the forward type.
Press the right soft key to move the cursor.
•
Dial the destination number (e.g.,
202
)
OR
Press
UP
or
DOWN
to select the destination
Press the right soft key to move the cursor
•
Dial
1
to set
OR
Press
UP
or
DOWN
to select
YES
or
NO
•
Press
TRANSFER
to store and exit
STATION CALL PICKUP
To pick up (answer) a call ringing at another station, lift the handset and dial
65
plus the extension number of the ringing phone.
If you have a
DP
key assigned with a station number, you only need to press this
DP
key with the flashing light to answer this ringing station.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER
button before you begin dialing.
GROUP CALL PICKUP
To pick up (answer) a call ringing in any pickup group, lift the handset and dial
66
plus the desired
group number
or press the flashing
GROUP PICKUP
button if
available.
GROUP NUMBERS
01-20
OfficeServ 100
and
OfficeServ 7100
01-99
OfficeServ 500 M
01-99
OfficeServ 500 L
01-99
OfficeServ 7200
and
OfficeServ 7400
NOTES:
1.
A group pickup button can have an extender for a specific pickup group.
2.
If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER
button before dialing the access code.
MY GROUP PICKUP
If desired, a new access code can be assigned to pickup ringing calls in the same
pickup group as you are in. Like “66” above except you do not need to dial the
desired group number. See your installation company for the assigned access
code. MY GROUP PICKUP: __________________.
26
Home Page
ITP-5107S
Table of Contents
