SAMSUNG
Clothes Washer Owner’s Instructions
C-4
CHILD LOCK
A function that prevents children from playing with your Washer.
ACTIVATING/DEACTIVATING
If you want to activate/deactivate the Child Lock function, press the
Soil Level
and
Signal
buttons at the
same time for 3 seconds.
How It Works:
1.
Child Lock can be activated while your Washer is running.
2.
Once you activate Child Lock, all controls (except for the Power button) will be locked until you
deactivate Child Lock.
3.
The Child Lock button will be lit while it is in effect.
Note:
When buttons, other than the Power button, do not respond, please check if the Child
Lock button is on.
G
You can add or take out laundry items even after the wash has started, as long as the light is
on. Pushing the Start/Pause button unlocks the door, unless the water is too hot or if there is too much
water in your Washer. If you are able to unlock the door and wish to continue the wash cycle, close the
door and press the Start/Pause button.
MY CYCLE
Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one–button
convenience.
By pushing the My Cycle button, you activate the settings used during the last My Cycle mode. The My
Cycle light will indicate activation.
You can select all options as follows in My Cycle mode.
1.
Select cycle using Cycle Selector dial.
2.
After cycle selection, set each option.
Note:
At this time, the option will follow as per each cycle’s default option selection.
3.
Then, you can start My Cycle by pushing the Start/Pause button in My Cycle mode.
The cycle and options you select will be displayed next time you choose My Cycle.
Note:
You can change My Cycle setting by repeating same process above.
The last used setting will be displayed at next time you choose My Cycle.
Washing a Load of Laundry
WF326LAW-02346B-06-EN-no line.indd 4
2007-04-18 ø¿»ƒ 4:24:41
