E-1
SAMSUNG
Clothes Washer Owner’s Instructions
CHECK THESE POINTS IF YOUR WASHER...
will not start..
•
Make sure door is firmly closed.
•
Make sure your Washer is plugged in.
•
Make sure the water source faucets are turned on.
•
Make sure to press the Cycle Selector dial to start your Washer.
•
Make sure the Child Lock is not activated; see page C4.
•
Before your Washer starts to fill, it will make a series of clicking noises
to check the door lock and do a quick drain.
has no water or not
enough water..
•
Turn both faucets on fully.
•
Make sure the door is tightly closed.
•
Make sure your Washer is plugged in.
•
Check fuse or reset circuit breaker.
•
Press the Cycle Selector dial to start your Washer.
•
Straighten water inlet hoses.
•
Disconnect hoses and clean screens. Hose filter screens may be
plugged.
•
Open and close the door, then press the Cycle Selector dial.
has detergent remains
in the automatic
dispenser after the
wash cycle is complete.
•
Make sure your Washer is running with sufficient water pressure.
•
Make sure the Detergent Selector dial is in the upper position when
using granular detergent.
vibrates or is too noisy.
•
Make sure your Washer is set on a level surface. If the surface is not
level, adjust your Washer feet to level the appliance.
•
Make sure that the shipping bolts are removed.
•
Make sure your Washer is not touching any other object.
•
Make sure the laundry load is balanced.
stops
•
Plug cord into live electrical outlet.
•
Check fuse or reset circuit breaker.
•
Close door and press the Cycle Selector dial to start your Washer. For
your safety, your Washer will not tumble or spin unless the door is
closed.
•
Before your Washer starts to fill, it will make a series of clicking noises
to check the door lock and do a quick drain.
•
There may be a pause or soak period in the cycle. Wait briefly and it
may start.
•
Check screens on inlet hoses at the faucets for obstructions. Clean
screens periodically.
Troubleshooting
WF326LAW-02346B-06-EN-no line.indd 1
2007-04-18 ø¿»ƒ 4:24:46
