2
For 4 way cassette
Bolt(M5XL35 MACHINE)
(4)
Installation manual
(1)
Accessories
1. Open the electrical component box cover.
After untightening the screws, slide the electrical component box
cover in the direction of the arrow as shown in the figure and pull it
down.
❈
If the supplied bolt is lost, you may purchase M5 machine bolt (with length of the thread more than 20mm long) and a circular washer
from any retail hardware store to replace the lost bolt.
2. Push the switch type handles inward and pull the grille to open.
Handles are located on the left and right side of the Samsung logo
on the grille.
You may have to open the air flow blades first in order to find the
handles.
Detach the front grille
1) Remove the safety clips first.
2) Pull the green switch on the hinge part towards the
sign and press and pull the hinge part to remove the grille.
( There are two hinges on the grille and you must apply this step
on both of them to remove the grille.)
3) For attaching the front grille, reverse the procedure above.
There is no need to detach the grille for the installation of the panel.
However, if you want to detach the grill follow the instructions below.
Panel Global 4way_IM_E 32728-1.indd 2
2010-11-04 오전 11:16:16
