Settings
35
2. Tap Tethering > Help.
Wi-Fi Direct
Wi-Fi Direct allows device-to-device connections so you can transfer large amounts of data over
a Wi-Fi connection.
Activate a Connection
1. Press
and tap
>
>
More settings
.
2. Tap the ON/OFF slider to turn Wi-Fi direct On .
3. Tap
Wi-Fi Direct
to set up a peer-to-peer connection over Wi-Fi.
While Wi-Fi Direct
mode is On,
Wi-Fi Direct is on
displays in the Status bar
.
Note
: The target device must also have Wi-Fi Direct service active and running before it can
be detected by your device.
Assign a Unique Name
1. Press
and tap
>
>
More settings
>
Wi-Fi Direct
.
2. Tap
>
Device name
.
3. Modify the current name and then tap
OK
.
VPN
If you want to send and receive email messages through an ISP (Internet Service Provider)
account (such as Outlook), or if you wish to use your device to access your corporate email
through a VPN (Virtual Private Network), you will first need to set up an IMAP or POP account.
Before you add a VPN you must determine which VPN protocol to use:
PPTP
,
L2TP/IPSec
PSK
,
L2TP/IPSec RSA
,
IPSec Xauth PSK
,
IPSec Xauth RSA
,
or
IPSec Hybrid RSA
.
Note
: You must configure a PIN or alphanumeric password before using credential storage
functions.
1. Press
and tap
>
>
More settings
.
2. Tap
VPN
>
Add VPN network
.
3. Enter a name for the VPN network in the
Name
field.
4. Select a VPN type from the
Type
drop-down menu. The options are:
DRAFT For Internal Use Only