2
CONNECTING A CABLE BOX/SATELLITE RECEIVER (SET-TOP BOX)
VIA COMPONENT CABLES
1.
Connect a Component Cable(Not supplied) between the COMPONENT IN (1 or 2) [Y, P
B
, P
R
] jacks on the TV and the
COMPONENT jacks on the Cable Box/Satellite receiver (Set-Top Box).
2.
Connect Audio Cables(Not supplied) between the COMPONENT IN (1 or 2) [R-AUDIO-L] jacks on the TV and the
AUDIO OUT jacks on the Cable Box/Satellite receiver (Set-Top Box).
Audio Cable (Not supplied)
Component Cable (Not supplied)
2
1
Storing Channels in Memory
(Automatic Method)
1
Press the
MENU
button to display the menu.
Press the ▲ or ▼ button to select
Channel
, then press the
ENTER
button.
2
Press the ▲ or ▼ button to select
Auto Program
, then press the
ENTER
button.
Press the ▲ or ▼ button to select an antenna connection, then press the
ENTER
button.
➢
Air
:
Air
antenna signal.
Cable
:
Cable
antenna signal.
Auto
:
Air
and
Cable
antenna signals.
4
When selecting the Cable TV system:
Press the
ENTER
button to start the auto program.
Press the ◄ or ► to select the correct analog signal cable system source among
STD
,
HRC
, and
IRC
, then press the
ENTER
button. If you have Digital cable TV, select the cable system signal source for both Analog and Digital.
➢
STD
,
HRC
, and
IRC
identify various types of cable TV systems. Contact your local cable company to identify the type of
cable system that exists in your particular area. At this point the signal source has been selected.
5
The TV begins memorizing all available stations.
After all the available channels are stored, the TV starts to remove scrambled channels (see page 47 of owner's manual). The
Auto program menu then reappears.
If you want to stop Auto Programming, press the
ENTER
button.
The
Stop Auto Program?
message will be displayed. Select
Yes
by pressing the ◄ or ► button, then press the
ENTER
button.
Press the
EXIT
button to exit.
Channel
Antenna
: Air
Auto Program
►
Clear Scrambled Channel
Channel List
Fine Tune
Signal Strength
P650_SA_QSG(1824A)_0919.indd 2
2008-09-23 오전 9:03:02
