Samsung PN50B540S3F, Quick Setup Manual

English - 5

Connecting a VCR

1

Unplug the cable or antenna from 

the back of the TV.

2

Connect the cable or antenna to the 

ANT IN terminal on the back of the 

VCR.

3

Connect an Antenna Cable between 

the ANT OUT terminal on the VCR 

and the ANT IN terminal on the TV.

4

Connect a Video Cable between the 

VIDEO OUT jack on the VCR and 

the AV IN 1 [Y/VIDEO] or AV IN 2 

[VIDEO] jack on the TV.

5

Connect Audio Cables between the 

AUDIO OUT jacks on the VCR and 

the AV IN 1 (or AV IN 2)  

[R-AUDIO-L] jacks on the TV.

6

Press the 

SOURCE

 button on the 

remote control until you see the 

VCR signal (see “To Select the 

Source” on page 10).

Using a Video Cable

➢

   If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of the 

TV. Alternatively, connect the cable to the “R” jack. If your VCR is stereo, you must connect two cables.

➢

  Each VCR has a different back panel configuration.

➢

  When connecting a VCR, match the color of the connection terminal to the cable.

➢

  When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).

VCR Rear Panel

TV Side Panel

Video Cable (Not supplied)

Audio Cable (Not supplied)

TV Rear Panel

1

Connect an HDMI Cable between 

the HDMI IN (1, 2(DVI), or 3) jack 

on the TV and the HDMI jack on the 

camcorder.

Using an HDMI Cable

➢

  Each Camcorder has a different back panel configuration.

TV Side Panel

TV Rear Panel

HDMI Cable (Not supplied)

Connecting a Camcorder

Camcorder

4

5

or

3

2144B.indb   5

2009-03-10   오후 6:48:22