19
English
03
Basic
Featur
es
SLEEP
✎
When
Speaker Select
is set to
TV Speaker
x
TV Speaker: On, External Speaker: On
✎
If there is no video signal, both speakers will be mute.
SPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
■
Audio Format
: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options
PCM
or
Dolby Digital
.
■
Audio Delay
: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
Setup Menu
¦
Setting the Time
O
MENU
m
→
Setup
→
Time
→
ENTER
E
Time
■
Clock
: Setting the clock is for using various timer
features of the TV.
O
The current time will appear every time you press
the
INFO
button.
✎
If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
−
Auto
: Set the current time automatically using the
time from a digital channel.
✎
The antenna must be connected in order to set
the time automatically.
−
Manual
: Set the current time manually.
✎
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set
: Set the
Month, Day, Year, Hour, Minute
and
am/pm
manually.
✎
Available only when
Clock Mode
is set to
Manual
.
✎
You can set the
Month
,
Day
,
Year
,
Hour
, and
Minute
directly by pressing the number buttons
on the remote control.
DST (Daylight Saving Time) (Off / On)
: Switches the
Daylight Saving Time function on or off.
✎
This function is only available when the
Clock
Mode
is set to
Auto
.
Time Zone
: Select your time zone.
✎
This function is only available when the
Clock
Mode
is set to
Auto
.
¦
Using the Sleep Timer
O
MENU
m
→
Setup
→
Time
→
Sleep Timer
→
ENTER
E
■
Sleep Timer
t
: Automatically
shuts off the TV after a preset period
of time (30, 60, 90, 120, 150 and 180
minutes).
✎
To cancel the
Sleep Timer
, select
Off
.
¦
Setting the On / Off Timer
O
MENU
m
→
Setup
→
Time
→
Timer 1
→
ENTER
E
You can set the TV to turn on automatically at a preset time.
■
Timer 1 / Timer 2 / Timer 3
: Three different on / off
timer settings can be made. You must set the clock first.
20
TV
Cable
1
00
am
00
00
00
am
▲
▼
Timer 1
On Time
Off Time
Volume
Inactivate
Inactivate
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Once
Source
Antenna
Channel
Repeat
L
Move
U
Adjust
E
Enter
R
Return
[PC500-NA]BN68-03217A-00L03.indb 19
2010-09-07 오전 10:46:33
