ENGLISH-
09
f
When installing the docking station, do
not leave the cord carelessly on the floor
since POWERbot may get tangled by it.
f
Do not use POWERbot on black colored
floors.
– The POWERbot may not be able to operate
normally.
f
Do not place any objects within 1.6 ft
(0.5 m) of either side of the docking
station or within 3.3 ft (1 m) of the front
of the docking station.
f
Make sure the docking station's charging
contact is not damaged or have any
foreign matters on it.
f
Do not install the docking station in an
area with a dark floor.
– If the floor around the docking station is
dark, recharging is hindered.
f
Move any obstacles that may disturb
POWERbot's movement (such as children's
indoor swing or slides) before cleaning.
f
Do not use the POWERbot in a place
which is narrower than its turning radius
(1.6 ft/0.5 m or less).
f
To clean all areas of your house, open all
rooms and attach the boundary markers
on the places where the POWERbot
may get damaged such as a front door,
veranda, bathroom, and stairs for safety.
f
For the very low areas where the
POWERbot may get stuck, attach the
boundary markers to prevent the
POWERbot from getting in.
f
If a brush or brush cover is not
assembled correctly, scratches may occur
on the floor, or product malfunction may
occur.
f
Before operating the POWERbot, remove
the objects which could break such as
a frame, mirror, and porcelain items
so that the POWERbot works without
interruption.
CAUTION
In use
f
Using the POWERbot on thick carpet may
damage both the POWERbot and the
carpet.
– The POWERbot cannot pass over carpet that
is thicker than 0.4 in (1 cm).
f
Do not use POWERbot on tables or other
high surfaces.
– There is a risk of damage if it falls.
f
The POWERbot may bump into chair, desk
legs therefore move them away for faster
and efficient cleaning.
f
When POWERbot is operating, do not lift
it up or carry it to another area.
f
Do not hold by driving wheels of
POWERbot when carrying it to another
area.
f
Do not put any objects on top of
POWERbot and camera since it may cause
malfunction.
f
Remove any large papers or plastic bags
immediately when using POWERbot since
they may block the intake.
f
Do not aim the red pointer directly at
people or animals.
f
Do not lie down around the POWERBOT
that is running.
– Your hair may be caught in the brush,
resulting in physical injury.
CAUTION
Cleaning and
maintenance
f
Prevent any damage to POWERbot by
complying with the following
– Do not clean POWERbot by spraying water
directly onto it or use benzene, thinner,
acetone or alcohol to clean it.
f
Do not disassemble or repair POWERbot.
This should only be done by a certified
repairman.
f
Always keep the obstacle sensor, cliff
sensor and camera clean.
– If foreign matter accumulates, sensors may
malfunction.
1_VR7200_EN_DJ68-00827B-00_AA.indd 9
2019-03-19 오후 5:25:20
