58
Ⅳ. ADJUSTMENT
10
- Check whether the icon and counter are displayed on the LCD
monitor.
11
- Check whether the recording time is displayed and there are a
noise, dim frame and discontinuous frame in the movie clip.
12
- Check whether the zoom rate is changed and there are unclear part,
noise and dim part in the image.
- The distance from the subject is 2M and have to use the FILL IN
flash.
13
- Check whether the PLAY mode can be selected without any
problem and there are any noise, frame shaking and discoutinuous
frame.
- Check the voice recorded in the still image and the movie clip.
- Check whether the still image can be enlarged correctly with the 5
function button.
14
- Select 2 sec. of slide show interval time and check whether there are
any noise, image shaking and discontinuous frame.
15
- Check whether the mode dial is rotated with the equal force.
- Check whether each camera mode can be recognized correctly.
16
- Check whether there are unclear part, dim part, noticeable flare,
noise, ghost image and smear.
17
- Check whether all images are deleted.
18
- Check whether the “NO IMAGE” message is displayed on the
LCD monitor.
- Check whether the LARGE, FINE icon and 0018 number are
displayed.
- Check whether the camera power is turned off without any problem.
MANUAL focus.
Take a movie clip with TELE zoom
during 10 seconds.
Take a chart with TELE zoom in a
low light condition.
Play back a image with the TFT
LCD monitor.
Start the slide show
in the PLAY mode.
Try to rotate the mode dial.
Download a image from a PC with
USB cable and check the image
quality in a external monitor.
Format the card in the PLAY mode.
(Delete all images in the PLAY mode)
Check whether there is no image and
reset the camera. Remove the card
and turn off the camera.
No.
Checking item
Check point
Summary of Contents for Pro 815
