4. Alignment and Troubleshooting
4.7.2.5. Mx-xxxx (Jam_Paper handling error)
► Error Code
M1–1110
► Error message
Paper Jam in Tray 1
► Symptom
The jammed paper has occurred in the tray1.
► Troubleshooting method
1) Remove the jammed paper.
2) If the jammed paper occurs continually, check the followings.
a) Check if the pick up/forward/separation rollers are worn out or contaminated. Clean the contaminated part
or replace it.
b) Check if the actuator is assembled correctly.
3) Check the motor operation, by checking if there is a service test for this component, perform it first. If there is any
defective parts, replace it or PH drive unit.
4-47
Copyright© 1995-2017 SAMSUNG. All rights reserved.