4. Alignment and Troubleshooting
4.7.2.6. Sx-xxxx (System error)
► Error Code
S2-1110 / S2–1210
► Error message
Error #S2-1110 Call for service
Error #S2-1210 Call for service
► Symptom
CPU in the main board has some problem.
► Troubleshooting method
1) Turn the machine off then on.
2) If the problem persists, replace the main board.
► Error Code
S2–33xx
► Error message
No message
► Symptom
This error shows the engine status.
► Troubleshooting method
•
S2–3310 : The engine is warming up.
•
S2–3311 : The engine is ready.
•
S2–3312 : The engine is printing.
•
S2–3313 : The engine is in the power save state.
•
S2–3314 : The engine is in the error state.
•
S2–3315 : The engine is in the recovery state.
•
S2–3316 : The engine is waiting.
•
S2–3317 : The engine is in EDC mode.
•
S2–3318 : The engine is in low power mode.
•
S2–3319 : The engine is in ACR (Auto Color Registration) mode.
•
S2–331A : The engine is in image density control or image stabilization mode.
When these errors display, wait until the message will be disappeared or turn the machine off then on.
4-53
Copyright© 1995-2017 SAMSUNG. All rights reserved.