Samsung PS-42C91H, Owner'S Instructions Manual

English - 30

Screen Burn Protection

To reduce the possibility of screen burn, this unit is equipped 

with screen burn prevention technology. This technology 

enables you to set picture movement up/down (Vertical Line) 

and side to side (Horizontal Dot). The Time setting allows

you to program the time between movement of the picture in 

minutes.

1

  Press the 

MENU

 button to display the menu.

2

  Press the ▲ or ▼ button to select 

Setup

, then press the 

ENTER

 button.

3

  Press the ▲ or ▼ button to select 

Screen Burn Protection

, 

then press the 

ENTER

 button.

4

  Select the required option by pressing the ▲ or ▼ button, then 

press the 

ENTER

 button.

Available options: 

Pixel Shift

, 

All White

, 

Signal Pattern

, 

Side 

Gray

5

  When you are satisfied with your setting, press the 

ENTER

button.

6

  Press the 

EXIT

 button to exit.

 

Pixel Shift

: Using this function, you can minutely move pixels 

on the PDP in horizontal or vertical direction to minimize after 

image on the screen.

−  Set 

Pixel Shift

 to 

On

 by pressing the ▲ or ▼ button, then 

press the 

ENTER

 button.

−  Select the required option by pressing the ▲ or ▼ button, 

then press the 

ENTER

 button.

  Available options: 

Horizontal Dot

, 

Vertical Line

, 

Time

➢ 

Optimum condition for pixel shift;

PC

TV/Ext/AV/S-Video/

Component/HDMI

Horizontal Dot

1

2

Vertical Line

1

2

Time (minute)

2 min

2 min

➢ 

The Pixel Shift value may differ depending on the monitor size (inches) and mode.

 

All White

: This function helps remove after images on the screen by changing the colour of pixels to 

white. Use this function when there are remaining after images or symbols on the screen especially 

when you displayed a still image on the screen for a long time.

 

Signal Pattern

: This function helps remove after images on the screen by moving all the pixels on 

the PDP according to a pattern. Use this function when there are remaining after images or symbols 

on the screen especially when you displayed a still image on the screen for a long time.

 

Side Gray

: When you watch TV with the screen ratio of 4:3, the screen is prevented from any 

damage by adjusting the white balance on both extreme left and right sides.

−

Dark

: When you set the screen ratio to 4:3, it darkens the left and right sides.

−

Light

: When you set the screen ratio to 4:3, it brightens the left and right sides.

➢ 

To remove after images on the screen, use either 

All White

 or 

Signal Pattern

 function. Although 

both of the two functions remove after images on the screen, 

Signal Pattern

 is more effective.

➢ 

The after image removal function has to be executed for a long time (approximately 1 hour) to 

effectively remove after images on the screen. If after image is not improved after the execution of the 

function, repeat the function again.

➢ 

Press any button on the remote control to cancel this feature.

Move 

 Enter 

 Return

Pixel Shift   



All White   



Signal Pattern 



Side Gray   

:

Dark



Screen Burn Protection

T V

Move 

 Enter 

 Return

Pixel Shift   

:

On 



Horizontal Dot 

:

2



Vertical Line 

:

2



Time 

:

2 min



Pixel Shift

T V

Move 

 Enter 

 Return



  More

Wall-Mount Adjustment



Energy Saving

:

Off



HDMI Black Level  : Low



PIP



Screen Burn Protection 



Setup

T V

BN68-01294D-01Eng_0517(´Üº»).indd   30

2007-10-08   ¿ÀÈÄ 1:52:04