English - 36
Setting Up
The following settings are to use functions.
Using the Function
1
Press the
button.
Press the ▲ or ▼ button to select
Setup
, then press the
ENTER
button.
2
Press the
ENTER
button to select
(HDMI-CEC)
, then
press the
ENTER
button.
3
Press the ▲ or ▼ button to select
On
, then press the
ENTER
button.
➢
The (HDMI-CEC) function is enabled.
➢
If you select
Off
, (HDMI-CEC) is disabled.
➢
When the (HDMI-CEC) function is disabled, all the
related operations are deactivated.
Turning an Device Off Automatically when the TV is Turned Off
2
Press the ▲ or ▼ button to select
Auto Turn Off
, then press
the
ENTER
button.
3
Press the ▲ or ▼ button to select
On
, then press the
ENTER
button.
➢
The Auto turn off function is enabled.
➢
If you select
Off
, the Auto turn off function is canceled.
Press the
EXIT
button to exit.
➢
The Select Device setting of the TV remote control is to be set
to TV to use the function.
➢
If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turned
off. However, if the device is recording, it may not be turned off.
Scanning and Switching between Devices
1
Press the
button.
2
Press the ▲ or ▼ button to select
Select Device
, then press
the
ENTER
button.
3
Press the ▲ or ▼ button to select to a particular device and
press the
ENTER
button.
It is switched to the selected device.
4
If you cannot find a device you want, press the ▲ or ▼ button
to select
Searching Connections
, then press the
ENTER
button.
The meassage
Configuring connection...
is
displayed. When searching devices completes, the connected
devices are listed in the menu.
➢
Switching to the selected devices may take up to 2 minutes.
You cannot cancel the operation during the switching
operation.
➢
The time required to scan for devices is determined by the
number of connected devices.
➢
When the device scan is complete, the number of found
devices is not displayed.
➢
Although the TV automatically scans devices when it is turned
on using the
POWER
button, devices connected when the TV is on or under a specific circumstance
are not displayed in the device list. Therefore select
Searching Connections
menu to search
devices.
➢
If you have selected external input mode by pressing the
SOURCE
button, you cannot use the
function. Make sure to switch to an device by using the
button.
Continued...
Setup
(HDMI-CEC)
: Off
Auto Turn Off
: Off
Searching Connections
Enter
Return
Move
Off
On
Setup
(HDMI-CEC)
: On
Auto Turn Off
: Off
Searching Connections
Enter
Return
Move
Off
On
Setup
(HDMI-CEC)
: On
Auto Turn Off
: On
Searching Connections
Enter
Return
Move
Enter
Move
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver
:Off
Setup
TV P 1
Exit
Enter
Move
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver
:Off
Setup
TV P 1
Return
DVDR1
DVDR2
DVD1
DVD2
BN68-01294D-01Eng_0517(´Üº»).indd 36
2007-10-08 ¿ÀÈÄ 1:52:08
