English - 16
Assigning Names to Channels
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed,
allowing you to assign new names.
1
Press the
MENU
button to display the menu.
2
Press the ▲ or ▼ button to select
Channel
, then press the
ENTER/OK
button.
3
Press the ▲ or ▼ button to select
Name
, then press the
ENTER/OK
button.
4
Press the ▲ or ▼ button to select the channel to be assigned
to a new name, then press the
ENTER/OK
button.
5
Press the ▲ or ▼ button to select a letter, a number, or a
symbol (Results in this sequence: A~Z, 0~9, +, -,
*
, /, blank).
Move on to the previous or next letter by pressing the ◄ or ►
button, then press the
ENTER/OK
button.
6
Repeat steps
4
to
5
for each channel to be assigned to a new
name.
7
Press the
EXIT
button to exit.
Fine Tuning Channel Reception
If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation.
If the signal is weak or distorted, you may have to fine tune the
channel manually.
1
Press the
MENU
button to display the menu.
2
Press the ▲ or ▼ button to select
Channel
, then press the
ENTER/OK
button.
3
Press the ▲ or ▼ button to select
Fine Tune
, then press the
ENTER/OK
button.
4
To obtain a sharp, and clear picture and good sound quality,
press the ◄ or ► button until you reach the optimal setting.
Press the
ENTER/OK
button.
➢
To reset the fine tuning to
0
, select
Reset
by pressing the
▲ or ▼ button. Press the
ENTER/OK
button.
5
Press the
EXIT
button to exit.
➢
Press the
INFO
button. Fine Tune Store will change the
colour of the Channel OSD (On Screen Display) from white
to red and add the “
*
” mark.
Fine Tune
P 1 *
+2
Adjust
Save
Return
Reset
P 1 *
Mono
Picture
: Dynamic
Sound
: Custom
SRS TS XT
: Off
−− : −−
am
Move
Enter
Return
Area
:
Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Channel
T V
Move
Enter
Return
Area
:
Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Channel
T V
Move
Adjust
Return
Prog.
Ch.
Name
0
C−−
−−−−−
1
C76
−−−−−
2
C5
−−−−−
3
C7
−−−−−
4
C8
−−−−−
Name
T V
A
BN68-01131D-01Eng.indd 16
2007-03-21 ｿﾀﾈﾄ 7:21:02
