Alignment and Adjustments
Samsung Electronics
1-1
1. Alignment and Adjustments
1-1 Service Mode
1-1-1 SERVICE MODE Entry Method (General Transmitter)
¢
For the General Transmitter
1. Turn the power off and set to stand-by mode.
2. Press the buttons of the transmitter in this order; POWER OFF-INFO-MEMO- POWER ON to turn the set on.
3. The set turns on and enters service mode.
¢
For the Factory Transmitter
1. Turn the power on.
2. Press the buttons of the transmitter in this order : Display-Factory.
3. The set enters service mode.
* If you fail to enter service mode, repeat steps 1 and 2 above.
1-1-2 Initial DISPLAY State of SERVICE MODE
1-1-2(A) OSD DISPLAY
1-1-2(B) Button Operations in SERVICE MODE
☞
Indicates selected input mode
☞
Picture Adjustment
☞
Setting the Initial Values
☞
Setting the Special Features
☞
Options-1 : Options of the Product Particulars
☞
Options-2 : Options of the PDP Properties
☞
Initializing after saving the adjustments
☞
Software Version Information
Factory Mode
Current Input Mode
01. Picture Improvement
√
02. Initial Setting
√
03. PIP/TTX/Test Pattern
√
04. Option-1
√
05. Option-2
√
06. Reset
√
Release : 2003-10-27-15:40
Version : T_MOZMEU_0086
Menu
Displays all menus
UP/DOWN
Cursor move to select items
LEFT/RIGHT
Enable to increase and decrease the data of the selected items
(ENTER)
Confirm your choice(Store OR Enter)
