background image

32

English

Using the M

enus

Support menu

Support

Option

Description

Self Diagnosis

Picture Test

 

Sound Test

Signal Information

If you think you have the Picture, Sound, Signal problem, 

perform the test. You can check the problem state.

If you hear no sound from the TV’s speakers, before 

 •

performing the sound test, make sure 

Speaker Select 

is set to

 TV speaker 

in the 

Sound

 menu.

The melody will be heard during the test even if 

 •

Speaker Select 

is set to 

External Speaker 

or the 

sound is muted by pressing the 

M

MUTE 

button.

If the signal strength meter indicates that the signal is 

 •

weak, physically adjust your antenna to increase the 

signal strength.Continue to adjust the antenna until you 

find the best position with the strongest signal.

Software Upgrade

To keep your product up-to-date with new Digital Television 

features then software upgrades are periodically broadcast 

as part of the normal Television signal. It will automatically 

detect these signals and display the software upgrade 

banner. You are given the option to install the upgrade.

By USB

 

Insert a USB drive containing the firmware upgrade into TV. 

Please be careful to not disconnect the power or remove 

the USB drive while upgrades are being applied. The TV 

will turn off and turn on automatically after completing the 

firmware upgrade. Please check the firmware version after 

the upgrades are complete. When software is upgraded, 

video and audio settings you have made will return to their 

default (factory) settings. We recommend you write down 

your settings so that you can easily reset them after the 

upgrade.

By Channel

 

Upgrades the software using the broadcasting signal.

Standby Mode Upgrade

 

To continue software upgrade with master power on, 

Select On by pressing the ▲ or ▼ button. 45 minutes after 

entering standby mode, a manual upgrade is automatically 

conducted. Since the power of the unit is turned on 

internally, the screen may be on slightly for the product. This 

phenomenon may continue for more than 1 hour until the 

software upgrade is completed.

Alternative Software

 

Replace the current software with the alternative.

HD Connection Guide

The brief instruction on 

How to get the best performance 

from your new HDTV

 is displayed. We offer the connection 

method for HD devices.

Contact Samsung

You can know the Samsung Call center, website and 

information for product.

You can move the previous or next page by pressing 

 

the ▲ or ▼ button.

TV Rear Panel

USB Drive

BN68-02353D.indb   32

2009-06-30   �� 10:22:43

Summary of Contents for PS42B430P2W










































Reviews: