Samsung PS42C450B1W User Manual Download

Page: 16 / 201

English

Basic Features

■

MPEG Noise Filter (Off / Low / Medium / High /
Auto)

: Reduces MPEG noise to provide improved

picture quality.

■

HDMI Black Level (Normal / Low)

: Selects the black

level on the screen to adjust the screen depth.

✎

Available only in HDMI mode (RGB signals).

■

Film Mode (Off / Auto1 / Auto2)

: Sets the TV to

automatically sense and process film signals from all
sources and adjust the picture for optimum quality.

✎

Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).

■

Screen Burn Protection

: To reduce the possibility of

screen burn, this unit is equipped with screen burn
prevention technology. The Time setting allows you to
programme the time between movement of the picture
in minutes.

Pixel Shift (Off / On)

: Using this function, you can

minutely move pixels on the PDP in horizontal or vertical
direction to minimize after image on the screen.

✎

Optimum condition for pixel shift

Item

TV/AV/Component/

HDMI

Horizontal

0~4

Vertical

0~4

Time

(minute)

1~4 min

4 min

✎

The

Pixel Shift

value may differ depending on the

monitor size (inches) and mode.

✎

This function is not available in the

Screen Fit

mode.

Auto Protection Time (10 min / 20 min / 40 min /
1 hour / Off)

: If the screen remains idle with a still

image for a certain period of time defined by the user,
the screen saver is activated to prevent the formation of
ghost images on the screen.

Scrolling

: This function removes after-images on the

screen by moving all the pixels on the PDP according
to a pattern. Use this function when there are remaining
after images or symbols on the screen, especially when
you displayed a still image on the screen for a long time.

✎

The after-image removal function has to be
executed for a long time (approximately 1 hour)
to effectively remove after-images on the screen.
If the after-image is not removed after performing
the function, repeat the function again.

✎

Press any key on the remote control to cancel this
feature.

Side Gray (Dark / Light)

: When you watch TV with the

screen ratio set to 4:3, the screen is prevented from any
damage by adjusting the white balance on both extreme
left and right sides.

Picture Reset (OK / Cancel)

Resets your current picture mode to its default settings.

Sound Menu

Changing the Preset Sound Mode

Mode

■

Standard

: Selects the normal sound

mode.

■

Music

: Emphasizes music over voices.

■

Movie

: Provides the best sound for

movies.

■

Clear Voice

: Emphasizes voices over

other sounds.

■

Amplify

: Increase the intensity of high-frequency sound

to allow a better listening experience for the hearing
impaired.

Adjusting Sound Settings

Equalizer

Adjusts the sound mode (standard sound mode only).

■

Balance L/R

: Adjusts the balance between the right and

left speaker.

■

100Hz

300Hz

1kHz

3kHz

10kHz

(Bandwidth

Adjustment): Adjusts the level of specific bandwidth
frequencies.

■

Reset

: Resets the equalizer to its default settings.

Sound Systems, Etc.

Virtual Surround (Off / On)

(standard sound mode only)
This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers or headphones using
HRTF (Head Related Transfer Function) technology.

S.MODE

[PC430]BN68-02692C-00L05.indb 16

2010-03-11 오후 5:43:42