English - 7
6. Auto Tuning
(Step 1)
: Selecting how you watch your TV
Let’s find and store channels on your TV. Do you need to search for channels?
•
Yes, I need to.
: Memorises all of the available channels using RF cable.
•
No, I don’t need to.
: You don’t need to use Auto Tuning to find channels.
7. Auto Tuning (Step 2)
: Selecting a search options
Select the desired broadcasting signal and antenna source. Press the
▲/▼/◄/►
button, then press the
ENTER
E
button.
When setting the antenna source to
Cable
, a step appears allowing you to assign numerical values (channel frequencies) to the
channels. For more information, refer to
Channel
→
Auto Tuning
.
✎
Press the
ENTER
E
button at any time to interrupt the memorisation process.
✎
See
e-Manual
chapter “Retuning Channels >
Auto Tuning
”
8. Clock
: Setting the Clock Mode
•
Auto
: Set the current time automatically.
•
Manual
: Allows you to manually set the current date and time.
9. Time Zone
(Depending on the country): Setting your Time Zone
This step is only available when the clock mode is set to
Auto
.
•
Auto
: Set the time zone automatically.
•
Manual
: Set the time zone manually.
✎
If you selected
Manual
, you can select whether to turn DST (Daylight Savings Time)
On
or
Off
. (Depending on the
country)
10. Setup Complete
Press the
ENTER
E
button.
✎
The completed settings are displayed.
If You Want to Reset This Feature...
Select
System
-
Setup
(Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to change the
PIN number, use the
Change PIN
function.
You should do
Setup
(
MENU
→
System
) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to
“0-0-0-0”:
MUTE
→
8
→
2
→
4
→
POWER
(on)
[PE490-XU]BN68-03984J.indb 7
2012-02-14 �� 2:02:17
