English - 11
Installing the Wall Mount
The wall mount kit (sold separately) allows you to mount the TV
on the wall. For detailed information on installing the wall mount,
see the instructions provided with the wall mount. Contact a
technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you elect to install the TV
on your own.
Wall Mount Kit Specifications (VESA)
✎
Wall mount kit is not supplied but sold separately.
Install your wall mount on a solid wall perpendicular to the
floor. When attaching to other building materials, please
contact your nearest dealer. If installed on a ceiling or slanted
wall, it may fall and result in severe personal injury.
✎
NOTE
x
Standard dimensions for wall mount kits are shown in
the table below.
x
When purchasing our wall mount kit, a detailed
installation manual and all parts necessary for assembly
are provided.
x
Do not use screws that do not comply with the VESA
standard screw specifications.
x
Do not use screws longer than the standard dimension,
as they may cause damage to the inside of the TV set.
x
For wall mounts that do not comply with the VESA
standard screw specifications, the length of the screws
may differ depending on their specifications.
x
Do not fasten the screws too strongly, this may damage
the product or cause the product to fall, leading to
personal injury. Samsung is not liable for these kinds of
accidents.
x
Samsung is not liable for product damage or personal
injury when a non-VESA or non-specified wall mount
is used or the consumer fails to follow the product
installation instructions.
x
Do not exceed 15 degrees tilt when mounting this TV.
inches
VESA Spec. (A * B)
Standard
Screw
Quantity
43~51
400 X 400
M8
4
60~64
600 X 400
Do not install your Wall Mount Kit
while your TV is turned on. It may
result in personal injury due to
electric shock.
Securing the TV to the Wall
Caution
: Pulling, pushing, or climbing onto the TV
may cause the TV to fall. In particular, ensure that
your children do not hang over or destabilize the TV;
doing so may cause the TV to tip over, resulting in
serious injuries or death. Follow all safety precautions
provided on the included Safety Flyer. For added
stability, install the anti-fall device for safety purposes,
as follows.
To avoid the TV from falling
1.
Put the screws into the clamps and firmly fasten them
onto the wall. Confirm that the screws have been firmly
installed onto the wall.
✎
You may need additional material such as an
anchor depending on the type of wall.
✎
Since the necessary clamps, screws, and
string are not supplied, please purchase these
additionally.
2.
Remove the screws from the centre back of the TV, put
the screws into the clamps, and then fasten the screws
onto the TV again.
✎
Screws may not be supplied with the product.
In this case, please purchase the screws of the
following specifications.
3.
Connect the clamps fixed onto the TV and the clamps
fixed onto the wall with a strong string and then tie the
string tightly.
✎
NOTE
x
Install the TV near to the wall so that it does not
fall backwards.
x
It is safe to connect the string so that the
clamps fixed on the wall are equal to or lower
than the clamps fixed on the TV.
x
Untie the string before moving the TV.
4.
Verify all connections are properly secured. Periodically
check connections for any sign of fatigue for failure.
If you have any doubt about the security of your
connections, contact a professional installer.
[PE490-ASIA]BN68-03997A-ENG.indb 11
2012-03-27 �� 8:00:13
