Figures and illustrations in this User Manual are provided for reference only and
may differ from actual product appearance. Product design and specifi cations
may be changed without notice.
User Instructions
Screen Image retention
Do not display a still image (such as on a video game) on the plasma display panel
for more than several minutes as it can cause screen image retention. This image
retention is also known as “screen burn”. To avoid such image retention, reduce the
degree of brightness and contrast of the screen when displaying a still image.
Heat on the top of the Plasma TV
The top side of the product may be hot after long periods of use as heat dissipates
from the panel through the vent hole in the upper part of the product.
This is normal and does not indicate any defect or operation failure of the product.
However, children should be prevented from touching the upper part of the product.
The product is making a “cracking” noise.
A “cracking” noise may occur when the product contracts or expands due to a
change in the surrounding environment such as temperature or humidity. This is
normal and not a defect of the unit.
Cell Defects
The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level)
pixels which require sophisticated technology to produce. However, there may be
a few bright or dark pixels on the screen. These pixels will have no impact on the
performance of the product.
Avoid operating the TV at temperatures below 41°F (5°C)
A still image displayed too long may cause permanent damage to the PDP
Panel.
Watching the Plasma TV in 4:3 format for a long period of time
may leave traces of borders displayed on the left, right and
centre of the screen caused by the difference of light emission
on the screen. Playing a DVD or a game console may cause
similar effects to the screen.
Damages caused by the above effect are not covered by the
Warranty.
After-images on the Screen.
Displaying still images from Video games for longer than a certain period of time may
produce partial after-images.
To prevent this effect, reduce the “brightness” and “contrast” when displaying still
images for a long time.
Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.
Contact SAMSU
NG WORL
D WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
Customer Care Centre
Web Site
AUSTRALIA
1300 362 603
www.samsung.com/au
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
www.samsung.com/nz
CHINA
400-810-5858
www.samsung.com
HONG KONG
(852) 3698 4698
www.samsung.com/hk
(Chinese)
www.samsung.com/hk_en
(English)
INDIA
1800 3000 8282
1800 266 8282
www.samsung.com/in
INDONESIA
0800-112-8888 (Toll Free)
(021) 56997777
www.samsung.com/id
JAPAN
0120-327-527
www.samsung.com
MALAYSIA
1800-88-9999
www.samsung.com/my
PHILIPPINES
1-800-10-7267864 [PLDT]
1-800-8-7267864 [Globe landline
and Mobile]
02-4222111 [Other landline]
www.samsung.com/ph
SINGAPORE
1800-SAMSUNG(726-7864)
www.samsung.com/sg
THAILAND
0-2689-3232,
1800-29-3232
www.samsung.com/th
TAIWAN
0800-32-9999
www.samsung.com/tw
VIETNAM
1 800 588 889
www.samsung.com
GEORGIA
0-800-555-555
www.samsung.com
ARMENIA
0-800-05-555
www.samsung.com
AZERBAIJAN
088-55-55-555
www.samsung.com
UZBEKISTAN
8-10-800-500-55-500
www.samsung.com
KYRGYZSTAN
00-800-500-55-500
www.samsung.com
TADJIKISTAN
8-10-800-500-55-500
www.samsung.com
MONGOLIA
+7-800-555-55-55
www.samsung.com
BELARUS
810-800-500-55-500
www.samsung.com
MOLDOVA
0-800-614-40
www.samsung.com
ALGERIA
0800 100 100
www.samsung.com/n_
africa
PAKISTAN
0800-Samsung (72678)
www.samsung.com/pk/
TUNISIA
80-1000-12
www.samsung.com/n_
africa
For personal and non-commercial use only.
Usage is subject to following the guidelines in the User Manual and
may not be available in all regions.
Plasma TV
user manual
© 2013 Samsung Electronics Co., Ltd. All rights reserved.
BN68-04871J
BN68-04871J-01
Important Safety Instructions
Getting Started
Accessories
Remote Control & Batteries (AAA x 2)
Owner’s Instructions
Warranty Card / Regulatory Guide (Not available in some locations)
Power Cord
Input Cables (Sold Separately)
Composite (AV)
Component
Coaxial (RF)
HDMI
TV Controller (Panel Key)
The TV’s Controller, a small joy stick like button on the rear left side of the TV, lets you control the TV without the remote control.
Remote control sensor
TV Controller
The image is drawn by
facing the front side of
the TV.
Function menu
m R
s
P
Return
Selecting the
Media Play
Selecting a
Source
Selecting the
Menu
Power off
✎
Exits the menu when pressing the controller more than 1 second.
✎
When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it first, you
cannot operate it to move the up/down/left/right directions.
Setup (Initial Setup)
When you turn the TV on for the fi rst time, a sequence of on-screen prompts will assist in confi guring basic settings. Press the
POWER
button. Set the
initial setup following instructions that the TV guides.
✎
Connecting the power cord and aerial. (refer to ‘Connections’)
Connections
For better picture and audio quality, connect to a digital device using an HDMI
cable.
The picture may not display normally (if at all) or the audio may not work if an
external device that uses an older version of HDMI mode is connected to the TV. If
such a problem occurs, ask the manufacturer of the external device about the HDMI
version and, if out of date, request an upgrade.
Be sure to purchase a certifi ed HDMI cable. Otherwise, the picture may not display
or a connection error may occur.
For set-top box connection using HDMI cable, we highly recommend you to
connect the
HDMI IN 1(STB)
port.
The TV model i
s not allowed for PC connection (distortion or incorrect picture
displaying can
appear).
Changing the Input Source
Source List
Use to select TV or other external input sources such as DVD / Blu-ray
players / cable box / STB satellite receiver connected to the TV.
1.
Press the
SOURCE
button.
2.
Select a desired external input source.
■
TV / HDMI1 / HDMI2 / AV / Component
✎
You can only choose external devices that are connected to the TV.
In the
Source
, connected inputs are highlighted.
How to use Edit Name
Edit Name
lets you associate a device name to an input source. To
access
Edit Name
, press the
TOOLS
button in
Source List
. Name the
device connected to the input jacks to make your input source selection
easier.
Information
You can see detailed information about the selected external device.
AUDIO OUT
AUDIO OUT
AUDIO OUT
L-AUDIO-R
VIDEO OUT
Y
R
Y
R
W
R
W
ANT OUT
AUDIO OUT
L-AUDIO-R
COMPONENT OUT
P
R
P
B
Y
R
B
R
G
R
B
RG
R
W
R
W
AUDIO IN
L-AUDIO-R
R
W
HDMI OUT
or
Power Input
TV Rear Panel
TV Side Panel
VHF/UHF Aerial
Cable
USB
HDMI connection
Set-top Box / Blu-ray players
Audio connection
Amplifi er / Home Theater
Component connection
Blu-ray player / DVD
AV connection
VCR
✎
The side panel may differ
depending on the model.
✎
The PDP device may interfere with an amateur radio or AM radio.
✎
When using two-way radio mobile and portable units or amateur
radio or AM radio near by your TV, this may cause the TV to
malfunction.
Remote Control
✎
This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.
Alternately select Teletext ON, Double, Mix or OFF.
Returns to the previous channel.
Press to directly access to channels.
Turns the TV on and off.
Use these buttons in a specifi c feature.
P.MODE
: Selects the picture mode.
P.SIZE
: Selects the picture size.
:
Sports Mode
on or off.
Cuts off the sound temporarily.
Selects the HDMI mode directly.
Displays the channel list on the screen.
Displays information on the TV screen.
Quickly select frequently used functions.
Selects the on-screen menu items and changes the
values seen on the menu.
Exit the menu.
Returns to the previous menu.
Displays and selects the available video
sources.
Use these buttons according to the direction
on screen.
Changes channels.
Displays the main on-screen menu.
Views the
Media Play
.
Adjusts the volume.
A
B
C
D
HDMI
P.SIZE
P.MODE
SPORTS
Installing batteries (Battery size: AAA)
✎
NOTE
•
Use the remote control within 23 feet from TV.
•
Bright light may affect the performance of the remote control. Avoid using nearby special fl uorescent light or neon signs.
•
The Colour and shape may vary depending on the model.
Broadcasting Menu
❑
Memorizing channels
Auto Tuning
(depending on the country)
✎
Automatically allocated programme numbers may not correspond to
actual or desired programme numbers. If a channel is locked, the PIN
input window appears.
❑
Using the Channel menu
Channel List
The
Channel List
contains the channels your TV displays when you press
the channel button. You can view channel information,
All
or
Favourites
1-5
. Press
►
(
Mode
) button to change the channel mode.
✎
When you press the
CH LIST
button on the remote control,
Channel
List
screen will be displayed at once.
Channel Mode
■
Edit Favourites
: Set channels you watch frequently as favourites.
✎
For detailed information about using
Edit Favourites
, refer to “
Edit
Favourites
”.
■
Favourites 1-5
: Shows all favourite channels, arranged in up to fi ve
groups. Each group has a separate screen.
✎
The TV displays
Favourites 1-5
only if you have added favourites
using
Edit Favourites
.
■
All
: Shows all currently available channels.
Schedule Manager
You can set a desired channel to be displayed automatically at the
intended time. In addition, you can view, modify or delete a channel you
have reserved to watch.
✎
You must set the current time first using the
Time
→
Clock Set
function in the
System
menu to use this function.
1.
Press the
Schedule
on the
Schedule Manager
screen. The
Schedule
Viewing
menu appears.
2.
Press the
▲
/
▼
/
◄
/
►
buttons to set each option menu.
■
Channel
: Select the desired channel.
■
Repeat
: Select
Once
,
Manual
,
Sat~Sun
,
Mon~Fri
or
Everyday
to
set at your convenience. If you select
Manual
, you can set the day you
want.
✎
The (
c
) mark indicates the day you’ve selected.
■
Date
: You can set the desired date.
✎
It is available when you select
Once
in
Repeat
.
■
Start Time
: You can set the start time you want.
✎
If you want to edit or cancel a reserved schedule, select the reserved
schedule on
Schedule Manager
. Then press the
ENTER
E
button
and select the
Edit
or
Delete
.
Edit Channel
You can edit or delete channels.
1.
Go to
Edit Channel
screen.
2.
Press the
▲/▼
buttons to select the desired channel, then press
the
ENTER
E
button. The (
c
) mark indicates the channel you’ve
selected.
✎
You can select more than one channel.
✎
Press the
ENTER
E
again to deselect the channel.
Using the coloured and function buttons with the Edit Channel
■
a
Red (Change Number)
: Changes channel order on the channel list.
−
E
(Done)
: Completes changing the channel order.
■
b
Green (Lock / Unlock)
: Lock a channel so that the channel cannot
be selected and viewed. / Unlock the channel that you locked.
✎
This function is available only when the
Channel Lock
is set to
On
.
✎
The PIN input screen appears. Enter your 4-digit PIN. Change the PIN
using the
Change PIN
option.
■
{
Yellow (Delete)
: Deletes a channel from the channel list.
■
}
Blue (Select All / Deselect All)
: Selects or deselects all channels
at once.
■
(Go To)
: Goes to channel directly by pressing numbers (0~9).
■
k
(Page)
: Move to previous or next page.
■
T
(Tools)
: Displays the option menu. The option menu items that
appear may differ depending on the channel status and type.
−
Category
: Changes the channel mode to
All, Recently Viewed,
Most Viewed.
The selected channel mode is displayed.
−
Edit Favourites
: Go to
Edit Favourites
screen directly.
−
Rename channel
: Assign a name of up to fi ve characters to a
channel. For example, Food, Golf, etc. This makes it easier to fi nd and
select the channel.
−
Channel Info
: Display details of the selected channel.
−
Information
: Display details of the selected programme.
Edit Favourites
t
You can add, edit or delete favourite channels.
1.
Go to
Edit Favourites
screen.
2.
Press the
▲/▼
buttons to select the desired channel, and then press
ENTER
E
button.
3.
Choose a specifi c favourite list among
Favourites 1-5
using
b
(
Change Fav.
) button, and then press the
{
(
Add
) button. The
selected channel has been added in
Favourites 1-5
.
✎
One favourite channel can be added in several of favourites among
Favourites 1-5
.
Using the coloured and function buttons with the Edit Favourites
■
a
Red (Category / Change order)
−
Category
: Changes the channel mode to
All, Recently Viewed
,
Most Viewed
. The selected channel mode is displayed.
−
Change order
: Changes the favourite channel order.
E
(
Done
): Completes changing the channel order.
■
b
Green (Change Fav.)
: Changes favourite list among
Favourites 1-5
.
■
{
Yellow (Add / Delete)
−
Add
: Adds selected channels to
Favourites 1-5
.
−
Delete
: Deletes the favourite channel from
Favourites 1-5
.
■
}
Blue (Select All / Deselect All)
: Selects or deselects all channels
at once.
■
(Go To)
: Goes to channel directly by pressing numbers (0~9).
■
k
(Page)
: Move to previous or next page.
■
T
(Tools)
: Displays the option menu. The option menu items that
appear may differ depending on the channel status and type.
−
Copy to favourites
: Copy the selected favourite channel in
Favourites 1-5
. You can add from other favourite list.
−
Rename Favourites
: Assign your own favourite channel name.
−
Edit Channel
: Go to
Edit Channel
screen directly.
−
Information
: Display details of the selected programme.
❑
Other Features
Channel Settings
■
Area
(depending on the country)
You can change the desired area.
■
Manual Tuning
Scans for a channel manually and stores in the TV.
✎
If a channel is locked, the PIN input window appears.
✎
According to the channel source,
Manual Tuning
may be supported.
1.
Press the
New
button.
2.
Set the
Programme, Colour System, Sound System, Channel
and
Search
.
3.
Press the
Store
button. When scanning has fi nished, a channel is
updated in the channel list.
✎
Channel mode
−
P
(programme mode): When tuning is complete, the broadcasting
stations in your area have been assigned to the position numbers
from P0 to P99. You can select a channel by entering the position
number in this mode.
−
C
(aerial channel mode) /
S
or
Z
(cable channel mode) (depending
on the country): These two modes allow you to select a channel
by entering the assigned number for each aerial broadcasting
station or cable channel.
■
Fine Tune
If the signal is weak or distorted, fi ne tune the channel manually.
✎
Fine tuned channels are marked with an asterisk “*”.
✎
To reset the fine-tuning, select
Reset
.
■
Transfer Channel List
(depending on the country)
Imports or exports the channel map. You should connect a USB storage to
use this function.
✎
The PIN number input screen appears. Enter your 4 digit PIN number.
✎
Supported file systems are FAT and exFAT.
Channel Lock
Lock channels in Channel menu to prevent unauthorized users, such as
children, from watching unsuitable programme.
✎
Available only when the
Source
is set to
TV
.
Picture Menu
❑
Changing the Preset Picture Mode
Picture Mode
t
Select your preferred picture type.
■
Dynamic
: Suitable for a bright room.
■
Standard
: Suitable for a normal environment.
■
Movie
: Suitable for watching movies in a dark room.
❑
Adjusting Picture Settings
Cell Light / Contrast / Brightness / Sharpness /
Colour / Tint (G/R)
Your television has several setting options for picture quality control.
✎
In analogue
TV, AV
modes of the PAL system, the
Tint (G/R)
function
is not available.
✎
Settings can be adjusted and stored for each external device
connected to the TV.
✎
Lowering picture brightness reduces power consumption.
Picture Size
Set the various picture options such as picture size and aspect ratio.
✎
The available items may differ depending on the selected mode.
✎
Depending on the input source, the picture size options may vary.
■
Picture Size
t
: Your cable box/satellite receiver may have its
own set of screen sizes as well. However, we highly recommend you
use 16:9 mode most of the time.
−
16:9
: Sets the picture to 16:9 wide mode.
−
Wide Zoom
: Magnifi es the picture size more than 4:3.
✎
Adjusts the
Position
by using
▲
,
▼
buttons.
−
Zoom
: Magnifi es the 16:9 wide pictures vertically to fi t the screen size.
✎
Adjusts the
Zoom
or
Position
by using
▲
,
▼
button.
−
4:3
: Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time. Traces of borders
displayed on the left, right and centre of the screen may cause
image retention (screen burn) which are not covered by the
warranty.
−
Screen Fit
: Displays the full image without any cut-off when HDMI
(720p / 1080i / 1080p) or Component (1080i / 1080p) signals are
inputted.
■
Zoom/Position
: Adjust the picture size and position. It is only available
in
Zoom
.
■
Position
: Adjust the picture position. It is only available in
Screen Fit
or
Wide Zoom
.
✎
The available items may differ depending on the selected mode.
✎
Settings can be adjusted and stored for each external device
connected to an input on the TV.
✎
If you use the
Screen Fit
function with HDMI 720p input, 1 line will be
cut at the top, bottom, left and right as in the overscan function.
Input Source
Picture Size
ATV/AV
16:9, Wide Zoom, Zoom, 4:3
Component(480i, 480p, 576i,
576p, 720p)
16:9, Wide Zoom, Zoom, 4:3
Component(1080i, 1080p)
16:9, Wide Zoom, Zoom, 4:3, Screen Fit
HDMI(720p, 1080i, 1080p)
16:9, Wide Zoom, Zoom, 4:3, Screen Fit
PIP
You can watch the TV tuner and one external video source
simultaneously.
PIP
(Picture-in-Picture) does not function in the same
mode.
✎
If you turn the TV off while watching in PIP mode, the PIP window
will disappear.
✎
You may notice that the picture in the PIP window becomes slightly
unnatural when you use the main screen to view a game or karaoke.
PIP Settings
Main picture
Sub picture
Component, HDMI
TV / AV
■
PIP
: Activate or deactivate the PIP function.
■
Source
: Select the source for the sub-screen.
■
Channel
: Select the channel for the sub-screen.
■
Size
: Select a size for the sub-picture.
■
Position
: Select a position for the sub-picture.
■
Sound Select
: You can choose the desired sound (
Main
/
Sub
) in
PIP
mode.
❑
Changing the Picture Options
Advanced Settings
(available in
Standard / Movie
mode)
You can adjust the detailed setting for the screen including colour and
contrast.
■
Dynamic Contrast
: Adjust the screen contrast.
■
Black Tone
: Select the black level to adjust the screen depth.
■
Flesh Tone
: Adjust the fl esh tone colour.
■
RGB Only Mode
: Displays the Red, Green and Blue colour for
making fi ne adjustments to the hue and saturation.
■
Colour Space
: Adjust the range of colours available to create the
image.
■
White Balance
: Adjust the colour temperature for a more natural
picture. R-Offset / G-Offset / B-Offset: Adjust each colour’s (red,
green, blue) darkness.
R-Offset / G-Offset / B-Offset
: Adjust each colour’s (red, green,
blue) brightness.
R-Gain / G-Gain / B-Gain
: Adjust each colour’s (red, green, blue)
brightness.
Reset
: Resets the
White Balance
to its default settings.
■
Gamma
: Adjust the primary colour intensity.
■
Motion Lighting
: Reduce power consumption by brightness control
adapted motion.
✎
Only available in
Standard
mode.
✎
When changing a setting value of
Cell Light
,
Brightness
or
Contrast
,
Motion Lighting
will be set to
Off
.
Picture Options
■
Colour Tone
✎
Warm1
or
Warm2
will be deactivated when the picture mode is
Dynamic
.
✎
Settings can be adjusted and stored for each external device
connected to an input on the TV.
■
Digital Clean View
: If the broadcast signal received by your TV is
weak, you can activate the
Digital Clean View
feature to reduce any
static and ghosting that may appear on the screen.
✎
When the signal is weak, try other options until the best picture
is displayed.
Auto Visualisation
: When changing analogue channels, displays
signal strength.
✎
Only available for analogue channels.
✎
When the
INFO
button is pressed, the signal strength bar is
displayed.
✎
When bar is green, you are receiving the best possible signal.
■
MPEG Noise Filter
: Reduces MPEG noise to provide improved
picture quality.
■
HDMI Black Level
: Selects the black level on the screen to adjust the
screen depth.
■
Film Mode
: Sets the TV to automatically sense and process fi lm
signals from all sources and adjust the picture for optimum quality.
✎
Available in TV mode and external input mode which supports SD
(480i / 576i) and HD (1080i).
✎
If the screen does not seem natural, change its option to
Off
/
Auto1
/
Auto2
in
Film Mode
.
■
Analog Clean View
: Reduces diagonal noise in picture caused by the
crosstalk of signals.
Picture Off
The screen is turned off but the sound remains on. Press any button
except volume button to turn on the screen.
Reset Picture
Resets your current picture mode to its default settings.
Sound Menu
❑
Changing the Preset Sound Mode
Sound Mode
■
Standard
: Selects the normal sound mode.
■
Music
: Emphasizes music over voices.
■
Movie
: Provides the best sound for movies.
■
Clear Voice
: Emphasizes voices over other sounds.
■
Amplify
: Increase the intensity of high-frequency sound to allow a
better listening experience for the hearing impaired.
PS43F4000
PS51F4000
PS43F4100
For India Only
This marking on the product, accessories or literature indicates
that the product and its electronic accessories should not be
disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please
separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of material
resources.
For more information on safe disposal and recycling visit our website
www.samsung.com/in or contact our Helpline numbers - 18002668282,
180030008282.
- English -
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus,
and to protect it from overheating, these slots and openings must never be blocked or covered.
- Do not cover the slots and openings with a cloth or other materials.
- Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
- Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.
• Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
• Do not place a vessel containing water (vases etc.) on this apparatus, as this can result in a risk of fire or electric shock.
• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool etc.). If this appratus accidentally gets wet, unplug it and contact an authorized dealer immediately.
• Make sure to pull out the power cord from the outlet before cleaning.
• This apparatus use batteries. In your community, there might be regulations that require you to dispose of these batteries properly to protect the
environment. Please contact your local authorities for disposal or recycling information.
• Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or electric shock.
• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular
attention to cords at the plug end, where connected to adaptors, and at the point where they exit from the apparatus.
• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.
• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local
electrical supply. (depending on the model)
• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
• Make sure to plug the power cord in until it is firmly inserted. Pull on the plug, not the cord, when removing the power cord from the outlet. Do not
touch the power cord with wet hands.
• If this appratus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact
an authorized dealer or service center.
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially
when children, elderly or disabled people will be left alone in the house).
- Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat, or cause the
insulation to deteriorate.
• Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high humidity,
chemical substances or where it will operate for 24 hours a day such as in an airport, a train station, etc. Failure to do so may cause serious damage
to your set.
• Use only a properly grounded plug and receptacle.
- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
• To turn off the apparatus completely, you must pull the power plug out of the wall socket. Consequently, the power plug should be readily accessible
at all times.
• Do not allow children to hang onto the product.
• Store the accessories (batteries, etc.) in a location safely out of the reach of children.
• Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed to vibration.
• Do not drop or impart a shock to the product. If the product is damaged, disconnect the power cord and contact a service center.
• To clean the product, unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such
as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. This may damage the appearance or erase the printing on the
product.
• Do not expose the apparatus to dripping or splashing.
• Do not dispose of batteries in a fire.
• Do not short circuit, disassemble, or overheat the batteries.
• not short circuit, disassemble, or overheat the batteries.
• There is a danger of explosion if you replace the batteries with the wrong type of battery. Replace only with the same or equivalent type.
• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
Warning! Important Safety Instructions
(Please read the safety instructions below before installing and using the product.)
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. RE
-
FER ALL SERVICING TO QUALIFIED PERSONNEL.
RISK OF ELECTRIC SHOCK. DO NOT OPEN
This symbol indicates that high voltage is present inside. It
is dangerous to make any kind of contact with any internal
part of this product.
This symbol indicates that important literature concerning
operation and maintenance has been included with this
product.
- 2 -
- 1 -
- 6 -
- 5 -
- 3 -
- 7 -
- 4 -
- 8 -
[PF4000-AR]BN68-04871J-01ENG.indd 1
2013-08-16 11:08:44
