background image

English - 1

Positioning and Sizing the screen using Zoom

−  Resizing the screen using the 

Zoom

 enables the positioning and sizing of the screen to up/down direction 

using the ▲ or ▼ button as well as the screen size.

−  Move the screen up/down using the ▲ or ▼ button after selecting the   by pressing the ◄ or ► button.

−  Resize the screen vertically using the ▲ or ▼ button after selecting the   by pressing the ◄ or ► button.

 

Screen Mode: 1:/Wide Zoom/Zoom/4:

When setting the picture size to Auto Wide in a 16:9 wide TV, 

you can determine the picture size you want to see the 4:3 

WSS (Wide Screen Service) image or nothing. Each individual 

European country requires different picture size so this function 

is intended for users to select it.

− 

1:

: Sets the picture to 16:9 wide mode.

− 

Wide Zoom

: Magnify the size of the picture more than 4:3.

− 

Zoom

: Magnify the size of the picture vertically on screen.

− 

4:

: Sets the picture to 4:3 normal mode.

➢ 

This function is available in 

Auto Wide

 mode.

➢ 

This function is not available in PC,Component or HDMI mode.

 

Digital NR: Off/Low/Medium/High/Auto

If the signal received by the television is weak, you can activate this feature to reduce any static and

ghosting that may appear on the screen.

➢ 

This function is not available in 

PC

 mode.

➢ 

When the signal is weak, select one of the other options until the best picture is displayed.

 

DNIe: Off/Demo/On

This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you

can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the

applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you

can view the difference in the visual quality.

➢ 

DNIe

TM

 (Digital Natural Image engine) 

 

 This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast 

enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, more 

detailed image to you. DNIe

TM

 technology will fit every signal into your eyes.

➢ 

This function is not available in 

PC

 mode.

➢ 

This function is available only in 

Dynamic

 mode.

 

HDMI Black Level: Normal/Low

Using this function, you can adjust the image quality when the screen burn (appearance of black

level, low contrast, low colour, etc.) is encountered by the HDMI input for RGB limited range (16 to

235).

➢ 

This function is active only when the external input connects to HDMI(RGB signals).

 

Movie Plus: Off/Low/Medium/High/Demo

You can view more natural skin and clear text even in fast moving scenes.

➢ 

This function is not available in 

PC

 mode.

➢ 

The 

Wide Zoom

Zoom

 and 

Just Scan

 mode are not supported.

 

Blue Only Mode: Off/On

This function is for AV device measurement experts. This 

function displays the blue signal only by removing the red and 

green signals from the video signal so as to provide a Blue 

Filter effect that is used to adjust the Colour and Tint of video 

equipment such as DVD players, Home Theaters, etc. Using 

this function, you can adjust the Colour and Tint to preferred 

values appropriate to the signal level of each video device 

using the Red/Green/Blue/ Cyan/Magenta/ Yellow Colour Bar 

Patterns, without using an additional Blue Filter.

➢ 

Blue Only Mode

 is available when the picture mode is set 

to 

Movie

 or 

Standard

.

 

Screen Burn Protection

To reduce the possibility of screen burn, this unit is equipped 

with  screen  burn  prevention  technology. This  technology 

enables you to set picture movement up/down (Vertical Line) 

and side to side (Horizontal Dot). The Time setting allows 

you to program the time between movement of the picture in 

minutes.

Continued...

 

Move 

 Enter 

 Return

Colour Tone            :

 

Normal

Size 

             :

 

Auto Wide

Screen Mode 

1:

Digital NR               :

 

DNle 

             :

 

HDMI Black Level   : 

Movie Plus  

: Low  

Blue only mode  : Off 

Screen Burn Protection         

Picture Options

T V

1:

Wide Zoom

Zoom

4:

 

Move 

 Enter 

 Return

Pixel Shift   

   

White 

 

 

 

Scrolling   

 

 

Side Gray   

:

 

Dark

 

Screen Burn Protection

T V

 

Move 

 Enter 

 Return

Colour Tone            :

 

Normal 

Size 

             :

 

Auto Wide 

Screen Mode 

:

 

1: 

Digital NR               :

 

Auto 

DNle 

             : On

 

HDMI Black Level   : Normal

 

Movie Plus  

: Low  

Blue only mode  : Off  

Screen Burn Protection                    

Picture Options

T V

BN68-01434D-Eng.indb   21

2008-03-10   오전 11:28:45

Summary of Contents for PS50A552S1R






















































Reviews: