background image

119

Other issue

There is no sound in HDMI mode.

Displayed picture colors may not look normal. Video or sound may not be available. This can 

occur if a source device that only supports an older version of the HDMI standard is connected 

to the product.
If these issues occur, connect an audio cable along with the HDMI cable.

Some PC graphics cards may not automatically recognize HDMI signals that do not include 

sound. In this case, manually select a sound input.

HDMI-CEC does not work.

To use several external devices compatible with the HDMI-CEC feature that are connected to 

the 

HDMI 

 ports on the product, turn off the HDMI-CEC features on all the external devices. 

External devices include Blu-ray and DVD players.
Operating an external device when its HDMI-CEC feature is enabled may automatically stop 

other external devices.
To change HDMI-CEC settings, refer to the device user guide or contact the device manufacturer 

for assistance.

In power-saving mode, when the input source is 

DisplayPort

, PC display settings cannot be saved.

Go to 

Settings

 → 

System

 → 

Power Control

 and set 

Max. Power Saving

 to 

Off

. Alternatively, 

configure the PC display output settings again. Ensure the product is turned on.

When booting the PC with the input source set to 

DisplayPort

, the BIOS and booting screens do not appear.

Boot the PC when the product is turned on or when the input source is not 

DisplayPort

.

 

"

For models with the 

DisplayPort

 

port only.

Summary of Contents for QBC

































































































































Reviews: