background image

83

Menu

Picture

2nd

3rd

Description

Smart Calibration

Use the Smart Calibration app, installed on your mobile device, to adjust the picture quality of the display.

 

"

This function may not be supported depending on the model.

Backlight

 / 

Brightness

 / 

Contrast

 / 

Sharpness

Your product has several options for adjusting picture quality.

 

"

You can adjust and store settings for each external device you have connected to an input on the product.

 

"

Lowering picture brightness reduces power consumption.

 

"

You may adjust the brightness of your display to achieve maximum level by going to 

Backlight

 and 

Contrast

 to 100(max).

 

"

Due to the characteristics of the display panels, brightness level of individual products may vary.

Color Temperature

It sets color temperature. The value and temperature increase simultaneously, so the ratio of blue color rises. (Range: 

2800K–16000K)

 

"

Enabled when 

Color Tone

 is set to 

Off

.

Advanced Settings

Configure advanced picture settings to create your preferred picture.

Picture Enhancer

Displays enhanced color and sharpness.

Color

Adjust the color saturation levels. Color saturation intensifies as the value nears 100. (Range: 0~100)

Tint (G/R)

Adjust the ratio of green to red tint levels. Increasing values intensifies the saturation of red and green colors. (Range: 0~50)

Chapter  07

Summary of Contents for QBC

































































































































Reviews: