Tuning broadcast signals manually
Settings Broadcasting Expert Settings Manual Tuning
Try Now
You can scan for all the channels manually and store the scanned channels in the TV.
This function may not be supported depending on the model or geographical area.
Tuning digital channels
Settings Broadcasting Expert Settings Manual Tuning Digital Channel Tuning
Select
New
, and then configure
Channel
,
Frequency
and
Bandwidth
, and then select
Search
to automatically scan
and store a list of digital channels in the TV.
Tuning analogue channels
Settings Broadcasting Expert Settings Manual Tuning Analogue Channel Tuning
Select
New
and configure
Programme
,
Colour System
,
Sound System
,
Channel
and
Search
to scan for analogue
channels. Then, select
Store
to store the scanned channels in the TV.
This function is only available for analogue broadcasts.
Channel mode
•
P
(pogramme mode)
When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from
P0 to P99. You can select a channel by entering the position number in this mode.
•
C
(aerial channel mode) /
S
(cable channel mode)
These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting
station or cable channel.
- 90 -
