Installing batteries into the Samsung Smart Remote
1
1
2
2
1.
Press the button at the top rear of the Samsung Smart Remote. The body will pop out
slightly from the body cover.
2.
Turn the remote over, and then slide the body of the remote upwards until the battery
compartment is revealed.
3.
If there are batteries in the remote, press the
r
and
l
buttons on both sides of the battery
compartment to remove the existing batteries.
4.
Insert two new batteries (1.5V AAA type) into the battery compartment making sure that
the batteries' polarities (+, -) are oriented correctly. When done, slide the body of the
remote until it is nearly in its original position.
5.
Turn the remote over, press and hold the button on the top rear, and then slide the body
of the remote down into place.
•
Alkaline batteries are recommended for longer battery life.
About the Samsung Smart Remote
When you start the TV for the first time by pressing the
P
(
Power
) button on the Samsung
Smart Remote, the TV automatically pairs with the Samsung Smart Remote. Once the TV and
Samsung Smart Remote have paired, you can use the Samsung Smart Remote to operate the
TV.
We recommend using Samsung Smart Remote at a distance of less than 6 m. A usable
distance may differ depending on the wireless environmental conditions.
English - 20
