• If the
Sleep Timer
or
Auto Power Off
has been set, the TV will override these settings, continue to record and
turn off after the recording has ended.
–
Settings
General
System Manager
Time
Sleep Timer
–
Settings
General
Power and Energy Saving
Auto Power Off
Before using the timeshift function
Timeshift may not be supported depending on the model or geographical area.
• For a USB device for recording, it is recommended to use the USB hard disk that supports USB 2.0 or later and
5,400 rpm or higher. However, RAID-type USB hard drives are not supported.
• USB memory sticks or flash drives are not supported.
• The total recording capacity may differ with the amount of available hard drive space and the recording quality
level.
• If the available storage space falls below 500 MB while both the Schedule Recording and Timeshift functions are
in progress, only the recording will stop.
• The maximum amount of time available for the Timeshift function is 90 minutes.
• The Timeshift function is not available for locked channels.
• Time-shifted videos are played according to the TV settings.
• The Timeshift function may be terminated automatically once it reaches its maximum capacity.
• The Timeshift function requires at least 1.5 GB of free space available on the USB storage device.
Supported broadcasting audio options
Check the supported broadcasting audio options.
Audio Type
Dual Sound
Default
A2 Stereo
Mono
Mono
Automatic change
Stereo
Stereo
,
Mono
Automatic change
Dual
Dual I
,
Dual II
Dual I
NICAM Stereo
Mono
Mono
Automatic change
Stereo
Mono
,
Stereo
Automatic change
NICAM Dual
Mono
,
NICAM Dual-1
,
NICAM Dual-2
NICAM Dual-1
If the
Stereo
signal is too weak and an automatic switching occurs, select
Mono
.
Available only for the stereo signals.
Available only when the input source is set to
TV
.
- 153 -
