English - 13
Engl
ish
04 Running the Initial Setup
When you turn on your TV for the first time, it immediately starts the Initial Setup. The Initial Setup allows you
to configure the basic settings for the TV to operate, such as broadcast reception, channel search, and network
connection, at one time.
• Before starting the Initial Setup, be sure to connect external devices first.
• To use the TV's smart features, the TV must be connected to the Internet.
You can also start the Initial Setup using the TV's menu (
>
Settings
>
General
>
Reset
).
Follow the instructions displayed on the Initial Setup screen and configure the TV's basic settings to suit your
viewing environment.
Using the TV Controller
You can turn on the TV with the
TV Controller
button at the bottom of the TV, and then use the
Control menu
.
The
Control menu
appears when the
TV Controller
button is pressed while the TV is On. For more information
about its usage, refer to the figure below.
• The screen may dim if the protective film on the SAMSUNG logo or the bottom of the TV is not detached.
Please remove the protective film.
Control menu
<Q800T
>
<Q900T
>
•
: Smart Hub
•
: Settings
•
: Return
•
: Source
•
: Power off
•
: Power off
•
: Channel Up
•
: Channel Down
•
: Volume Up
•
: Volume Down
•
: Source
TV Controller
button /
Remote control sensor
The
TV Controller
is located on the bottom of the TV.
<Q800T
>
• Press
button: Display the
Control menu
. Select or run a focused item on the menu.
• Press and hold
button: The running function is terminated.
• Up/Down button: Changes the channel.
• Left/Right button: Changes the volume.
<Q900T
>
•
:
Press: Move
•
:
Press & Hold: Select