3-7
3. Disassembly and Reassemble
Description & Screws
Picture Description
10
Remove the DC VSS-PD BOARD. (Decomposition
order :
1
-
2
-
3
)
•
32"
1
Before Removing SMPS Board, You have
yo discharge the SMPS by using service
JIG.
•
If LED ON -> LED OFF discharge is
completed.
<Before discharging> <After discharging>
LED ON
LED OFF
Measurement point
2
Remove the SMPS Board pushing to the
arrow direction.
1.
Pushing Connector A.
2.
Insert the OPEN JIG like a picture.
3.
Gently lift up (Top Left corner) to
release the lock.
3
Gently lift up (Top Left corner) to release
the lock and Slide Board to the Right.
Locking
Fixing Hole
A/S-DISCHARGE-JIG
BN81-16292A
Measurement point
Slide to the right to release the board
Bottom chassis Guide Fixing Hole
1
2
Locking
3
3
