Upgrading Memory
One or more memory modules are installed on the computer.
There are 2 memory slots and users can replace the installed memory or add new
memory.
Before You Start!
Replace new memory only after shutting the computer down completely. Do not
replace memory when the computer is in Sleep mode.
Disconnect main power plug and remove the battery before continuing.
To utilize the dual channel feature, using memory modules with the same
specifications (of the same capacity and from the same manufacturer) is
recommended.
Only use the same type of memory as specified in the Product Specification.
Adding a Memory Module
1
Remove the screw on the memory
memory
compartment cover at the bottom of
the computer using a screw driver.
Fixing Screw
2
Insert a new memory module into
the memory slot at an angle of
approximately 30 degrees aligning it to
the angle of the memory slot.
Memory Slot
