background image

1

Usage Related

Do not place a candle, light 

cigar, etc. over or on the 

product.

There is a danger of fire.

Use a wall outlet or multi-

plug with a grounding part.

Failing to do so may cause 

electric shock hazard.

Make sure to have the 

product tested by a safety 

service engineer after 

repairing the product.

Authorized Samsung Repair 

Centers will carry out safety 

checks after a repair. Using 

a repaired product without 

testing it for safety may 

cause an electric shock or 

fire.

In case of lightning, 

immediately turn the 

system off, disconnect 

the power cord from the 

wall outlet and phone line 

from modem. Do not use a 

modem or phone.

There is a danger of electric 

shock or fire.

Do not use your computer 

and AC Adapter on your lap 

or soft surfaces.

If the computer temperature 

increases, there is a danger 

of burning yourself.

Connect only permitted 

devices to the connectors 

or ports of the computer.

Failing to do so, may cause 

electric shock and fire.

Close the LCD panel 

only after checking if the 

notebook computer is 

turned off.

The temperature may 

rise and it may cause 

overheating and deformation 

of the product.

Do not press the Eject 

Button while the Floppy 

Disk/CD-ROM drive is in 

operation.

You might lose data and 

the disk might be suddenly 

ejected and could cause an 

injury.

Take care not to drop the 

product while using it.

This may cause personal 

injury or loss of data.

Do not touch the antenna 

with electricity facility such 

as the power outlet.

There is a danger of electric 

shock.

When handling computer 

parts, follow the 

instructions on the manual 

supplied with the parts.

Failing to do so, may cause 

damage to the product.

If the computer emits 

smoke, or there is a burning 

smell, disconnect the 

power plug from the wall 

outlet and contact a service 

center. If your computer is 

a notebook computer, make 

sure to remove the battery.

There is a danger of fire.

Do not use a damaged or 

modified CD/Floppy Disk.

There is a danger of 

damaging the product or 

personal injury.

Do not insert your fingers 

into the PC Card Slot.

There is a danger of injury or 

electric shock.

  Caution

Failing to follow instructions marked with this symbol may cause slight injury or damage to the product.

Summary of Contents for R523
























































































Reviews: