77
4
Select
Internet Protocol Version 4(TCP/IPv4)
from the list of Network Components and click
Properties
.
The Network Component name may differ
depending on the Operating System Installed.
To add a network component, click
Install
in the
screen shown in the figure above. You can add
clients, services, and protocols.
5
Configure the IP settings.
When using DHCP, select
Obtain an IP address
automatically
. To use a static IP address, select
Use the following IP address
, and set the IP
address manually.
When not using DHCP, ask your network administrator
for the IP address.
6
When you have completed the settings, click the
OK
button.
The network settings have been completed.
Bremen_R530_V7_eng.indb 77
2011-04-27 오후 5:29:02
