• Close the
refrigerator door
after fitting the
water tank.
- Confirm that the
dispenser cock is
outside after closing
the door.
Fix water tank to the fridge door tightly.
If not, water tank may not be operate
correctly.
Do not use the refrigerator without
the water tank. If not, it may cause an
efficiency problem.
Do not fill anything other than water as
mineral water or purified water in the
water tank.
• Place a glass underneath the water outlet and
push gently against the dispenser lever with
your glass.
Make sure the glass is in line with the
dispenser to prevent the water from bouncing
out.
Check that the locking device is set to
“UNLOCK”.
Water can only be dispensed on this
setting.
Dispenser
Lever
UNLOCK
LOCK
CAUTION
CAUTION
CAUTION
USING THE COOLSELECT DUO
(OPTIONAL)
1. Disassemble the chilled room box. (Depending
on the specification, the box can be easily
disassembled when the guard on the right side
is removed.)
2. Move the knob to the left or right side to
manually set the desired temperature.
(The temperature of the chilled room is highest
when the knob is on left side, and lowest when
the knob is on the right side.)
Knob
If you set the knob greater than
medium value, The Chilled Room inner
temperature can be lower than a Fridge
temperature, and the vegetables and fruit
can be frozen.
3. After manually setting the desired temperature,
put the box back to the original place.
(If the guard is removed, assemble the guard
into its original place.)
CAUTION
24
_ operating
Summary of Contents for RB10FSR4E Series
Page 39: ......