14
REVERSING THE DOOR SWING
Read these instructions completely and carefully
- IMPORTANT NOTES
- TOOLS YOU WILL NEED
- DISASSEMBLY THE FRIDGE DOOR
Unplug the refrigerator from its electrical outlet.
Empty all door guards / racks.
1. After removing the screw with the screwdriver,
disassemble the Cover Hinge on the top of the
refrigerator.
3. With the 10 inch wrench, remove the four
bolts that hold the top of the refrigerator.
2. Disconnect electric wire on the top of the refrigerator.
Warning
1. If you want to change the door direction, call 1-800-SAMSUNG.
2. Read the instructions carefully before starting.
3. Handle parts carefully to avoid scrathing paint.
4. Set screws down by their related parts to avoid using them in the wrong places.
5. Provide a non-scratching work surface for the doors. (ex : blanket)
6. During door reversing, refrigerator should not be stained with oil.
screwdriver
10 inch wrench
- ADDITIONAL PARTS
Hinge Mid
Screw
Compression
Fitting
Compression
Nut
Cover Hinge
4. Apart Hinge from electric wire as below
picture.