27
Temp Control &Operation Functions
2-1) The temperature will be selected between 46
℉
and 34
℉
at an interval of 2
℉
by pressing one button.
2-2) When the Fridge button is pressed, the current set temp will be displayed.And, when the button is pressed
again within 5 seconds, it will carry out the following 2 -3) and when there is no button press for 10
seconds, it will display the finally selected temperature.
2-3) The temperature will be selected in the following order.
(38
℉→
36
℉→
34
℉→
46
℉→
44
℉→
42
℉→
40
℉
)
2-4) When power is on or there is a power failure,it will display the real temperature.
(It displays the real temperature when a function button is pressed)
2-5) The STD temperature for each step is as follows.(Based on 1/3H copper bar)
2-6) When the Fridge button is pressed, 7-SEG will be changed immediately. But, its function will go into
operation in 10 seconds.
2) Fridge Temperature Control
Step
Temp
1
46
℉
2
44
℉
3
42
℉
4
40
℉
5
38
℉
6
36
℉
7
34
℉
1-1) It is selected by pressing the Super Freeze button.
1-2) When the Super Freeze button is pressed once,Super Freeze will be turned on.And then, it will repeat Off
and On each time you press the button after the above
1-3) With the initial Power On,the LED is off. (When the F-Room temperature is over 41
℉
(5
℃
))
1) Super Freeze Function
Category
Display Change
Initial Power On
OFF
Pressed Once
Super Freeze
Pressed Again
OFF
Other
A. When it goes into Super Freeze with the Super Freeze button pressed, the LED will be changed
immediately. But, its function will go into operation in 10 seconds.
(Comp and Fan will operate continuously for 2 and a half hours.)
B. When Super Freeze is selected,it goes into operation regardless of the compartment temperature.
C. During the operation of Super Freeze,the fridge compartment will be controlled according to the Fridge
Notch setting.
D. The Freezer display will show the real temperature.
10-3) Super Freeze Function and Super Cool Functions
