English
Reversing the door
NOTE
For the models with handles, reverse the handles first. (For detailed information, see the
“
Handle replacement (For models with bar handles)
” section.)
A
1.
With the fridge door closed, use a Phillips
screwdriver to remove the screws
fastening the
top cover (A)
.
A
2.
Gently lift the
top cover (A)
and place it on
top of the refrigerator.
- Be careful when you lift the
top
cover (A)
. There is a wire connected
underneath it.
3.
Remove the wire and the wire connector
placed on the holder underneath the top
cover.
- This step may not apply to some
models.
CAUTION
Do not pull the connectors too hard.
A
4.
Disconnect the
wire connector (A)
.
- This step may not apply to some
models.
RB7300T_User-servicing-manual_EN.indd 6
2020-11-19 PM 6:03:32
