English
31
Installation
To correct the door gap
Door gaps can be corrected using the
gap bolt on the top right corner of the
refrigerator.
1.
With the door closed, use a
Philips
screwdriver
to remove 6 screws on the
top cover with the wire connectors.
2.
Use a 4 mm
Allen wrench
(not
provided) to correct the door gap
between two doors.
- To widen the gap, turn the gap bolt
clockwise.
- To narrow the gap, turn the gap bolt
counterclockwise.
3.
When done, reinsert the top cover.
CAUTION
The electrical connectors must be left intact during this process. Use caution so you don't
tangle the connector wires or peel off the coating.
Untitled-5 31
2016-07-21 5:09:36
Summary of Contents for RF22K9581SR/AA
