English - 22
Connecting to the water supply line
1. First, shut off the main water supply line.
2. Locate the nearest cold, drinking water line.
3. Follow the Water line Installation Instructions in
the installation kit.
CAUTION
The water line must be connected to the
cold water pipe.
If it is connected to the hot water pipe, it
may cause the purifier to malfunction.
Close Main Water
pipe
Close Main
Water pipe
No gap
4. After connecting the water supply to the water
filter, turn your main water supply back on and
dispense about 3 L to clear and prime the
water filter.
Connecting the water line to the
refrigerator
1. Remove the cap from the water line on the unit
and insert the compression nut of the water line
into the water line on the unit.
2. Connect the water line on the unit with the
water line in the kit.
3. Tighten the compression nut onto the
compression fitting.
There should be no gaps between (A, B & C).
4. Turn water on and check for any leakage.
Only connect the water line to a drinkable
water source.
If you have to repair or disassemble the
water line, cut off 6.5 mm of the plastic
tubing to make sure you get a snug, leak-
free connection.
No gap
Loosen a
Remove cap
Water Line from
Kit
Water Line from
unit
Before being used, the leakage in these
places should be examined.
• Samsung Warranty does not cover WATER
LINE INSTALLATION.
• It will be done at customer’s charge unless the
retail price includes installation cost.
• Please contact Plumber or Authorized Installer
for the installation if needed.
• If Water leakage occurs due to improper
installation, Please contact installer.
CAUTION
DA68-02954H (EN)-03-���.indd 22
2018. 2. 1. �� 3:48