background image

English 

47

 

Operations

09  Control Lock (3 sec)

Control Lock

(Main panel)

To prevent accidental setting changes, press and hold 

Control 

Lock

 for 3 seconds. The main panel will be disabled and the Lock 

indicator (  ) will turn on. 
When Control Lock is on, the indicator blinks if any button (except 
for the Control Lock button) on the main panel is pressed.
If you press and hold the button again for more than 3 seconds, 
Control Lock will be deactivated.
However, Control Lock will be reactivated if no button is pressed 
within 1 minute.

NOTE

Control Lock on the main panel does not affect the dispenser. 
The dispenser operates independently and so does the dispenser 
lever. To lock the dispenser and the dispenser lever, use the Lock 
function on the dispenser.

Device 
authentication

When connecting the refrigerator to Samsung Smart Home App 
or Samsung smart devices such as Samsung Smart TVs, follow the 
app’s or device’s onscreen instructions and press and hold 

Control 

Lock

 for 5 seconds. The temperature panel displays “

on

” for 5 

seconds before proceeding with the authentication procedure. 
Note that the Control Lock function will be not affected by this 
authentication.

Untitled-7   47

2017-03-15     12:26:24

Summary of Contents for RF23M807

















































































Reviews: