English
43
Ins
tallation
To connect the water filtering hose to the water line
Remove cap
a
a
A
B
03
a
A.
Water Line from unit
B.
Water Line from Kit
1.
Loosen and remove the
compression
nut (a)
from the water line of the
refrigerator, and insert it to the water
filtering hose.
2.
Tighten up the
compression nut (a)
to
connect the water filtering hose and the
water line.
3.
Open the main water valve and check
for any leaks.
4.
If there are no leaks, dispense about a
3 liters of water before actually using
the refrigerator to remove impurities
inside the water filtering system.
NOTE
If you have to relocate the refrigerator
after connecting the
water line
, make sure
the joined section of the water line must is
straight.
CAUTION
Do not mount the water filter on any part
of the refrigerator. This may damage the
refrigerator.
To repair the water line
CAUTION
The waterline must be repaired by a qualified professional. If you encounter a water leak,
contact a local Samsung service centre or the installer of the waterline.
Untitled-14 43
2022-12-23 3:07:31
