operating
_21
02
OPERA
TING
Making Ice
•
To fill the ice bucket to maximum capacity after
installation, follow these steps:
1.
Allow your refrigerator to operate and cool
down for 24 hours (or 1 full day).
- Waiting 24 hours will allow your ice maker to
cool properly.
2.
Dispense 4 to 6 ice cubes into the glass.
3.
After 8, and then 16 hours, dispense a full
glass of ice.
•
To test the ice maker, press the Test button
on the ice maker. You will hear the refrigerator
chime (ding-dong). When the chime sounds,
release the Test button.
•
The chime sounds automatically again to let
you know the ice maker is working well.
If you want to remove the ice cubes
without using the ice bucket, please turn
the ice maker off and remove the ice
maker’s front cover from the ice maker.
Note that the ice cubes in the ice maker
can spill out over the drawer.
Do not put food in the ice bucket. If you
store food in the ice bucket, the food can
strike the ice maker when you open or
close the door, causing damage to the ice
maker.
Note that the ice cubes in the ice bucket
may spill out over the drawer when you
remove the ice bucket from the drawer.
If this occurs, be sure to clear the ice
cubes that spilled out of the drawer.
If a power failure occurs, ice cubes may
melt, and then freeze together when
the power comes back on, causing the
dispenser to stop working.
CAUTION
CAUTION
CAUTION
CAUTION
To prevent this problem, after a power failure, pull
out the ice bucket and discard the residual ice or
water.
If you use all the ice at once, you must
repeat ice making Steps 2 and 3, left.
However, only wait 8 hours before dispensing the
first 4 to 6 ice cubes. This will replenish the ice
cubes and ensure maximum ice production.
Using the Ice Off Function
When you select the Ice Off mode, remove all ice
cubes from the bucket. If you leave the ice cubes
in the bucket, the ice cubes may clump together,
making it difficult to remove them. To remove the
ice bucket, push the button on the upper right of
the bucket (1 in the illustration above), lift up the
bottom, and then pull out. To put the bucket back
in, push the bucket straight back until you hear a
click. If the bucket does not fit, turn the helix 90
degree (see the last illustration on the right, above)
and try again.
• Use only the ice maker provided with the
refrigerator.
• Have a suitably qualified person install
and connect the water supply line to the
refrigerator.
• Connect the water supply line to a
potable water supply only.
• To operate the ice maker properly, water
pressure of 20 ~ 125 psi (138 ~ 862
kPa)is required.
Going on vacation...
If you have a long vacation or business trip and
won’t use the water or ice dispensers for a long
time:
- Close the water valve. Otherwise, water
leakage may occur.
- Remove all food.
- Unplug the refrigerator.
- Wipe excess moisture from inside and leave
the doors open. Otherwise, odor and mold
may develop.
Ice Maker Do’s and Don’ts
•
Do not put your fingers, hands or any other
unsuitable objects in the chute or ice-maker
bucket
- It may result in personal injury or material
damage.
CAUTION
check
the water
level
Test button
Summary of Contents for RF24FSEDBSR
Page 35: ...memo...
Page 107: ...Note...