( 3 )
Alram
(Hold 3
sec for
Filter
Reset
The Alarm button serves two purposes:
- To turn the door open alarm on and off
- To reset the water fi lter life indicator.
1) Door Alarm Function
If the door alarm is set to On, an alarm beeps if any refrigerator door is left open for
more than three minutes. The beeping stops when you close the door. The door
alarm function is pre-set to On in the factory. You can turn it off by pressing and then
releasing the Alarm button. You can turn it back on in the same fashion. The icon lights
up when the function is on.
When the Door Alarm function is on and there is an alarm sound which is triggered by
the door opening, the Door Alarm Icon will blink together with the alarm sound.
2) Water Filter Life Indicator Function
After you replace the water fi lter Touch and hold this button for 3 seconds to reset the
water fi lter life indicator. When you reset the water fi lter life indicator, the Filter icon on
the panel turns Off. The Filter icon will turn red to let you know it is time to change the
water fi lter after six months (about 300 gallons). Some areas have large amounts of
lime in their water, which causes the water fi lter to clog more quickly. If this is the case
in your area, you will have to change the fi lter more frequently than every six months.
( 4 )
Lighting
(Hold 3
sec for ºC
↔
ºF)
Lighting button serves two purposes:
- To turn the dispenser light on and off
- To switch the temperature units between ºC and ºF
1) Light Function
Touching the Lighting button turns on the Dispenser LED lamp in continuous mode so
that it stays on continuously. The button also lights up. If you want the Dispenser lamp
to come on only when some one uses the dispenser, press the Lighting button to turn
the continuous mode off.
2) To switch the temperature units
Touch and hold this button for 3 seconds to select the type of temperature you want
displayed.
Each time you press and hold the button, the ºC and ºF temperature modes alternate
and the ºC and ºF icon lights up, indicating your selection.
( 5 )
Fridge
(Hold 3
sec for
Power
Cool)
The Fridge button serves two purposes:
- To set the Fridge to your desired temperature.
- To turn the power cool function on and off.
1) To set the Fridge temperature
Press the Fridge button to set the refrigerator to your desired temperature. You can set
the temperature between 44°F (7°C) and 34°F(1°C) .
2) Power Cool function
Touch and hold this button for 3 seconds to decrease the time needed to cool products
in the Refrigerator. It can be helpful if you need to quickly cool easily spoiled items or
if the temperature in
the fridge has warmed dramatically (For example, if the door was left open).
