English - 11
SETTING
UP
REMOVING THE REFRIGERATOR
DOORS
For some installations, you need to remove the
fridge and freezer drawers so you can move the
refrigerator to its final location.
Do not remove the doors/drawer if you don’t need
to. If you do not need to remove the refrigerator
doors, go to “Leveling the Refrigerator” on page
14.
If you need to remove the doors. continue below.
Before removing the door/drawer, make sure you
read the following items:
WARNING
Disconnect power to the refrigerator before
removing the door or drawer.
•
Be careful not to drop, damage or
scratch the door / drawer while removing
them.
•
Be careful not to injure yourself while removing
the doors / drawer.
•
Reattach the door/drawer properly to avoid:
- Moisture from air leakage.
- Uneven door alignment.
- Wasting energy due to improper door seal.
WARNING
Disassembling the refrigerator doors
Be careful not to drop and scratch the doors while
removing them.
With the door opened
1. Remove 3 screws holding down the TOP
TABLE (
1
) and separate the connected wires.
(1)
2. Disconnect two connectors (
2
) on the left side
door. To remove the water coupler from the
hinge, twist and pull it from the hinge.
Remove the water line (
3
) while pressing the
marked part (
4
) of the water line coupler.
(2)
(3)
(4)
3. Pull and remove the hinge lever (
5
).
Remove the ground screw (
6
) attached to the
upper left door hinges with a philips screwdriver
(+). Remove the upper left and right door
hinges (
7
).
(5)
(7)
(6)
DA68-03029A-07.indb 11
2015. 11. 6. �� 11:34
