English - 21
SETTING
UP
3. While pushing the door in the direction of the
arrow, lift up the Mid Hinge Shaft (D).
D
4. Being careful that the door does not touch the
Mid Hinge (E), tilt the Door forward a little, and
then lift it up to remove.
1
2
E
ASSEMBLING THE
REFRIGERATOR DOORS
• Be sure to re-attach the Freezer Door
before re-attaching the Fridge Door.
• Before re-attaching, make sure that all the wire
connectors at the bottom of the Freezer Door
are connected.
How to Re-attach the Freezer Door
1. Insert the door into the lower hinge (A) in the
direction of (1) and then push the door in the
direction of (2).
Take care not to scratch the door with the Mid-
Hinge (B).
1
2
A
B
CAUTION
• Be careful not to damage the wires on
the bottom of the door.
Avoid stepping on them, etc.
2. Insert the Hinge Shaft (C) into the Mid Hinge
Hole (D) and put on the Hinge Cap (E).
• When assembling the Hinge Shaft and
the Hinge Cap, be sure to assemble
them in the correct direction.
C
D
E
3. With the door open, join the connectors on the
bottom of the door.
-
Be careful not to step on or damage the
connectors.
4. Attach the Adjustable Leg Cover using a Phillips
(+) Screwdriver.
CAUTION
DA68-03194H (EN)-06.indd 21
2016. 3. 24. �� 3:21