Installation
English
38
Installation
To reattach the freezer doors
CAUTION
• After re-attaching the doors, make sure all the electrical connectors are properly
connected.
• The freezer doors must be re-attached before the fridge doors.
• Be careful not to damage or step on the wires during this process.
1.
Insert the freezer door into the bottom
hinge while pushing the freezer door in
the direction of the arrow.
CAUTION
• Be careful not to damage or step on the
wires during this process.
NOTE
For RF60A* models
: Fasten the middle
hinge using a Phillips screwdriver and
an Allen wrench. To prevent the middle-
hinge from misaligning, fasten the middle
bolt first, followed by the left bolt and the
screw.
2.
While pressing the hinge shaft down,
position the door so that the hinge shaft
is below the shaft hole in the middle
hinge. Release the hinge shaft so that it
enters the shaft hole.
Untitled-5 38
2021-07-28 11:33:04