Setting Up
_13
01
sEttinG uP
5. Position the Top Table (
2
) in place.
With a philips head screwdriver, insert and tighten the
3 screws into the Hinge Cover. With the door opened,
reinsert the Hinge Cover cap (
1
) and close the doors.
When reattaching the hinge cover, make sure that the
wires are not pressed or damaged by the hinge cover.
1
2
REAttACHinG tHE REFRiGERAtoR DooRs
The water line (
5
) must be fully inserted to the marked line to prevent
water leakage from the dispenser.
CAUTION
3
3
4
5
4. Connect the water line (
5
) and then insert a clip
on the coupler with pulling tube. Connect the one
connector(
4
) on left side door and two connectors
(
3
) at each side of the top cap.
The clip is enveloped inside of the top cap.
coupler
